USER’S GUIDE TFT LCD-MONITOR Model No : L700CAV http://www.dwe.co.
FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Emission Characteristics Tested by SEMKO A sample of this type has been tested and has shown compliance with theguidelines in the swedish document TCO 99. DECLARATION OF CONFORMITY This product is also designed for IT power system with phase to phase voltage of 230V. We, Manufacturer / Importer DAEWOO ELECTRONICS CO.
CONTENTS Introduction ............................................................................. 1 Product Features ................................................................. 2 Setup ......................................................................................... 3 Connecting the 15 Pin Signal Cable and Power Cord ......... 3 Connecting the Speakers ......................................................4 Connecting the Others .........................................................
SETUP PRODUCT FEATURES CONNECTING THE 15 PIN SIGNAL CABLE AND POWER CORD The monitor is designed for use in a small work area or for those who need more work space on the desk. The convenient and user-friendly on-screen display allows for easy and accurate adjustments of screen size, position and screen color. The monitor supports a safe working environment in strict compliance with the TCO 99 standard for low emissions .
CONNECTING THE SPEAKERS ABOUT SPEAKER BUTTONS 1. Align the two hooks on each speaker with the holes on the right and left side of the monitor and insert the hooks into the holes. 2. Plug the connector of the POWER (DC IN 12V) Jack 1 of the speaker R into the adapter cord 2 . Plug the other side of the adapter cord into a AC power outlet. 1/2 VOLUME (UP/DOWN) adjusts audio volume. (up) : increases speaker volume. 1 (down) : decreases speaker volume. 3.
OPERATION & ADJUSTMENT CONNECTING THE OTHERS CONTROL PANEL 1. Plug the connector to the S-Video port 1 on the rear of the monitor (ex : VCR, DVD , ---). 1 POWER 2 POWER Indicator shows both normal operation and power management status with power indicator light. swithes the monitor on and off. 2. Plug the connector to the RCA port 2 on the rear of the monitor (ex : Camcorder, VCR, DVD, ---). 5 4 3 3.
ADJUSTMENT PROCEDURE KEY PROCESS MENU 1280X1024 80K UT L TY 75 UT L TY OSD EXIT Adjust the CLOCK control. OSD SELECT UT L TY No Is the H.Size proper? SELECT SHARPNESS EXIT Yes Is the noise displayed on the screen? SHARPNESS Perform the AUTO POSITION. No Yes EXIT Perform the AUTO TRACKING.
OSD FUNCTIONS WITH USING PC SOUND B VOLUME Increase or decrease audio volume. BALANCE Balance audio sound. BLUE CONTROL Adjust the blue color. Choose different preset color COLOR temperatures or set your own customized TEMPERATURE color parameters. CENTER TREBLE Adjust high frequency response. BASS Adjust low frequency response. H. CENTER & V. CENTER ; Adjust the position of the display horizontally (left or right) and vertically (up or down).
SELF DIAGNOSIS CONTRAST Adjust the contrast of image, the difference between light and dark areas on the screen. CONTRAST OSD FUNCTIONS WITH USING VIDEO VOLUME Increase or decrease audio volume. BRIGHTNESS Adjust the brightness of image. CONTRAST Adjust the contrast of image. COLOR SATURATION Adjust saturation of image. HUE Adjust the hues of image. SHARPNESS Adjust the display image quality (if the screen proceed to scaling up).
SPECIFICATIONS Panel Synchronization Video Bandwidth Max Resolution Colors Display Area PC Input Signal AV Input Signal Size Pixel Pitch Viewing Angle Contrast Ratio Brightness Color Filter Horizontal Vertical ) Sync Video Video Audio TV Receiving Signal TV Tuner (Option) External Speaker Max. Output Plug and Play Power Source Power Consumption Dimension-W x H x D (without speaker) 17-inch(43.2 cm) diagonal 0.264 x 0.
FACTORY PRESET TIMINGS CHANGING THE STAND REMOVING THE STAND VESA MODES Mode VGA Resolution (dots X lines) 640 X 480 a 60Hz H.Freq (KHz) V.Freq (Hz) Remark 31.5 60 Non-interlaced VGA 640 X 480 a 72Hz 37.9 72 Non-interlaced VGA 640 X 480 a 75Hz 37.5 75 Non-interlaced SVGA 800 X 600 a 56Hz 800 X 600 a 60Hz 35.2 56 Non-interlaced 37.9 60 Non-interlaced 48.1 72 Non-interlaced SVGA 800 X 600 a 72Hz 800 X 600 a 75Hz 46.9 75 Non-interlaced XGA 1024 X 768 a 60Hz 48.
TROUBLESHOOTING ATTACHING THE MONITOR WITH THE ARM-STAND(OPTION) Symptom Check Picture is jitterd. Adjust Clock to set the screen position and adjust Clock fine until a noise isn’t displayed. No picture. Check if power switch and computer power switch are in the on position. Check if the signal cable is correctly connected to the video card. Tighten 4 screws. Check if the pins of D subconnector are not bent. Check if the computer is in the power- saving mode. Use the VESA approved arm-stand.
APPENDIX DESCRIPTION FOR D-SUB CONNECTOR Symptom No sound. Check Check if the speaker power switch and the audio cable are correctly connected to the computer. Adjust the volume after checking the sound is muted. Check the audio system in the computer. Low sound. Adjust the volume on the OSD Menu and the speaker. Adjust the volume of the sound card in the computer. Dull sound. Adjust Bass and Treble on the OSD Menu. No video.
