User's Manual

S/N : 9978630501

10. TROUBLESHOOTING

Check if power switch and computer power switch

are in the on position.

Check if power switch is in the on position.

Check if the power cord is correctly connected.

Adjust H&V Size or H&V Center to get the proper

image.

Keep the devices that may cause electrical interfer-

ence away from the monitor.

See the FCC information at the front cover of the

manual.

Operate Degauss once.

Adjust Contrast and Brightness.

Operate Degauss once.

Adjust Geometry Control (Pincushion, Trapezoid..).

Symptom

No picture.

POWER LED is not

lit.

Image is not

centered, too small

or too large.

Picture bounces or a

wave pattern is

present in the

picture.

Color looks blotchy.

Picture is blurred.

Edges of available

area on the screen

are not straight.

Check