User's Manual

Preparation
Inserting Batteries into the Remote Control Unit
Mains Connection
1. Connect the DC plug of the AC adaptor to the DC 12V(DC 15V-only 20”) input terminal of
the set.
2. Connect the AC adaptor and AC cord.
3. Plug the other end of AC cord into a Power outlet with 100V - 240V AC, 50/60Hz.
11
To load the batteries, turn the remote control
handset over and open the battery compartment.
Insert the batteries (Not supplied, two 1.5v, type
R03 or AAA). Make sure that the polarity
matches with the (+) and (-) marks inside of the
battery compartment.
Note: To avoid damage from possible battery
leakage, remove the batteries if you do not
plan to use the remote control handset for
an extended period of time.
Power outlet
AC Adapter
AC Cord
DC 12V input terminal
(DC 20V-only 20”)