User's Manual

Connections

TO WALL ANTENNA SOCKET

If there is a wall antenna socket in apartment house, connect the antenna cable as shown

below. (Use the type of antenna cable corresponding to that of wall antenna socket.)

For good quality of image, the antenna requirements of color television reception are more

strict than those of black & white television reception. Thus, it is strongly recommended to use

good outdoor antenna.

The following is a brief explanation of the type of connections that are provided with the

various antenna systems.

1. A 75-ohm system is generally a round cable with F-type connector that can be easily

attached to a terminal without tools (not supplied).

2. A 300-ohm system is a flat “twin-lead” cable that can be attached to a 75-ohm terminal

through a 300-75-ohm antenna converter (not supplied).

• If you have a 75-ohm round cable, insert bronze wire and then tighten connecting nut. If you

have a 300-ohm flat cable, connect twisted wire to antenna converter and then connect the

converter to ANT IN.

• When using 75-ohm round cable, do not bend bronze. It may cause poor picture quality.

Wall connecting port

75 round cable

300 flat cable

Antenna

converter

Turn clockwise

to tighten