User's Manual

Basic

Operations

TV/AV MODE SELECTION

By pressing the TV/VIDEO button on the TV set,

you can

change the mode as follows:

TV AV S-Video Comp1 Comp2

PC TV ....

With the remote controller, you can select the

mode as below.

• TV button : Selection for TV input mode.

• AV button : Selection for AV/S-Video input

mode.

• PC button : Selection for PC monitor input

mode.

• COMPONENT button : Selection for

Component input mode.

SWITCHING ON/OFF

SWITCHING ON

1 If the indicator is not lit, the TV set is powered off. You must press the POWER button of

the TV set.

2 Press the POWER button on the remote controller on the TV set when the indicator is red.

The TV set will be switched on and the indicator will be changed to green.

SWITCHING OFF

1 To set the TV set back to stand-by mode, press the POWER button on the remote

controller on the TV set for 2 seconds. The indicator will become red.

2 Press the POWER button on the TV set to switch the TV set off completely.

* If you turn the TV off, the present time that you have set will disappear.

• If you don't use the set for extended periods of time, unplug the AC cord from power

outlet.

COMPONENT