PLASMA DISPLAY USER’S MANUAL DSP-4280GM DSP-4282GM Proper use guarantees product life. Before using the product, be advised that you read this owner’s manual well and try to operate it. - Product Warranty is included - DAEWOO ELECTRONICS, LTD.
Features • 42” super-wide, 8 cm Ultra Slim Wall-mounting TV SUMMUS PLASMA opens new TV era with advanced plasma technology – 8 cm ultra slim TV. Light weight of only 30 Kg allows installing in narrow space. • DVD Direct Connection / Outstanding Picture Quality Digital Broadcasts Receive (SD Grade) DVD can be directly connected so that you can view clear digital images, and by connecting digital broadcasts connecting terminal with which digital broadcasts can be viewed, you can enjoy high quality images.
F C C R F I N T E R F E R E N C E S TAT E M E N T NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Safety Precautions Power Always obey all safety messages. • All the safety and operating instructions should be read before the product is operated. If anything strange happens, unplug this product from the wall outlet. • Do not disassemble or replace any parts of the monitor. Refer servicing to qualified service personnel. During a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet.
While Using Monitor Do not open cover (or back) because high voltage is present within the monitor’s enclosure. Never push objects of any kind into this product through opening at the back of monitor. It may cause electric shock. It may cause fire or electric shock. No objects filled with liquids, such as vases, shall be placed on the monitor. Do not allow children to play or hang on the monitor. Do not place candle or lighted cigarette on the monitor.
Safety Precautions Power Always obey all safety messages. • All the safety and operating instructions should be read before the product is operated. CAUTION You can be injured or this product or any other your property can be damaged if you don’t follow instructions. When moving your monitor, remove the power plug, antenna, and cables, and be sure to move it by more than two persons. It can result in a risk of electric shock.
During Use Do not wipe the monitor using a cloth damped with chemicals (benzene, thinner, etc.). Do not place the monitor near magnetic, speakers, or telephones. Monitor appearance may be marred. (Unplug the power plug and wipe with soft cloth.) It can cause the color tone of the screen. Do not place heavy objects or heat sources on the power cord. Do not place any object or cover on the monitor. It may damage the power cord, causing fire or electric shock.
Checking Accessories Check to be sure the following items are packed with your Monitor.
Supplied Accessories The following items are optional accessories. Refer the purchasing of the optional accessories to the DaeWoo Electronics Local Dealer or the dealer from whom you purchased. (45 page) Speakers DSP-SP20/SP21/SP22 - Speaker Main Unit Dimension : 100(W) x 628(H) x 83(D)mm - Including Speaker Stand Dimension : 170(W) x 729(H) x 194(D)mm - Audio Amplifier : 8W + 8W - Impedance : 8Ω - Weight : 7.
Panel Controls Front Panel, Back Panel, Remote Control Parts having same names in Plasma Display and Remote Control would function in exactly the same way. Front Power STAND BY/OPERATE • Power control sensor • Power Standby: Red - Standby Select when adjusting volume or select/adjust “MENU.” Press when moving “MENU.
Remote Control • Use two “AAA” batteries. • Be sure to use replacement batteries of the same type as the original ones. • The life of a battery depends on how much it has been used. ) indicates the page in which * The number in ( the function of each button is explained in detail. INPUT SELECT POWER Input Select button Power button Used to select a desired input.
Installation Instructions When Using the Stand * When installing PDP Main Unit, be sure to do it by more than 2 professionals. * For detailed installation, refer to the User’s Manual, “STAND (DSP-ST20).” 1 Take out STAND from package. 2 Smoothly fit the Stand to Plasma Display Separate the Cover Stand. (It is used when using for wall mounting, so store it.) 3 Engage the assembled stand with 4 screws (M5) enclosed.
CONNECTING THE DISPLAY TO SPEAKER 1 Connecting Speaker to Stand Be sure to check if there is sponge attached to the surface on which speaker is contacted. • By using (-) driver or coin, fasten the special screw securely. Stand 2 Connecting Speaker Cable • Connect one set (two cables) of the cable to the terminals on the back of the speaker in the way that red cable is for (+) terminal and black cable for (–) terminal.
3 Input Select INPUT SELECT • Select [Component 1 or Component 2] by pressing INPUT SELECT button of Remote Control or PDP unit. • Each time you press INPUT SELECT button, a different input mode appears. The sequence is as follows: Component 1 --> Component 2 --> Video 1 --> Video 2 --> Computer. Component1 Component2 PC 4 Video1 Video2 Select a desired channel and • Select a desired channel and function by using the Remote Control of Digital Broadcasting Receiver.
Watching Cable Broadcasts Watching Cable Broadcasts • To watch cable broadcasts, subscribe to your local Cable TV Broadcasting, then connect the digital set-top box for cable TV to PDP as shown below. 1 Connect Digital Broadcasting Receiver to PDP. • Prepare the audio/video connecting cable. • Connect the receiver(Output) to PDP(Video Input) as shown below. • When connecting to external AV source, match the colors.
3 Input Select INPUT SELECT • Select [Video 1 or Video 2] by pressing INPUT SELECT button of Remote Control or PDP unit. • Each time you press INPUT SELECT button, a different input mode appears. The sequence is as follows: Video 1 --> Video 2 --> Computer --> Component 1 --> Component 2. Video1 Component2 4 Video2 PC Component1 Select a desired channel and • Select a desired channel and function by using the Remote Control of Cable Broadcasting Receiver.
Watching Satellite Broadcasts Watching Satellite Broadcasts • To watch satellite broadcasting, subscribe to Digital Satellite Broadcasting, then connect the digital set-top box for satellite broadcasting to PDP as shown below. 1 Connect PDP to Satellite Broadcasting Receiver. • Prepare the audio/video connecting cable. • Connect the receiver(Output) to PDP(Video Input) as shown below. • When connecting to external AV source, ……………….
3 Input Select INPUT SELECT • Select [Video 1 or Video 2] by pressing INPUT SELECT button of Remote Control or PDP unit. • Each time you press INPUT SELECT button, a different input mode appears. The sequence is as follows: Video 1 --> Video 2 --> Computer --> Component 1 --> Component 2. Video1 Component2 4 Video2 PC Component1 Select a desired channel and • Select a desired channel and function by using the Remote Control of Satellite Broadcasting Receiver.
Watching a DVD Image Watching a DVD Image • Component Input is set to 480i, 480p mode. • Connect the cable from the DVD Video Out (Y, Pb/Cb, Pr/Cr) to the Component Input of the pack panel of PDP, and connect the cable from DVD Audio Left, Right) to the Audio Input of the back panel of PDP. 1 Connect a DVD Player to PDP. • Prepare the AV cable. • Connect the DVD(Output) to PDP(DTV/DVD Input) as shown below. • When connecting to external AV source, match the colors.
3 Input Select INPUT SELECT • Select [Component 1 or Component 2] by pressing INPUT SELECT button of Remote Control or PDP unit. • Each time you press INPUT SELECT button, a different input mode appears. The sequence is as follows: Component 1 --> Component 2 --> Video 1 --> Video 2 --> Computer. Component1 Component2 PC 4 Video1 Video2 Select a desired title and function • Select a desired title and function by using the Remote Control of DVD.
Watching a VCR Image Watching a VCR Image 1 Connect a VCR to PDP. • Prepare the AV cable. • Connect the Video(Output) to PDP(Video Input) as shown below. • Video can use either normal video terminal or S-video terminal. R AUDIO L R PC INPUT UPGRADE PORT L- AUDIO -R DTV/DVD INPUT S-VIDEO VIDEO VIDEO INPUT L- AUDIO -R L SPEAKER(8 OHMS) S-VIDEO VIDEO L- AUDIO -R VIDEO INPUT 2 24 Press Power buttons • Turn the PDP and VCR ON.
3 Input Select INPUT SELECT • Select [Video 1 or Video 2] by pressing INPUT SELECT button of Remote Control or PDP unit. • Each time you press INPUT SELECT button, a different input mode appears. The sequence is as follows: Video 1 --> Video 2 --> Computer --> Component 1 --> Component 2. Video1 Component2 4 Video2 PC Component1 Select a desired function • Select a desired title and function by using the Remote Control of VCR.
Watching a Camcorder/Game Console Image Watching a Camcorder/Game Console Image • Enjoy images recorded by camcorder or connect the game console to PDP. 1 Connect a Camcorder/Game Console to PDP. • Prepare the AV cable. • Connect the Video(Output) to PDP(Video Input) as shown below. • When connecting to external AV source, match the colors.
3 Input Select INPUT SELECT • Select [Video 1 or Video 2] by pressing INPUT SELECT button of Remote Control or PDP unit. • Each time you press INPUT SELECT button, a different input mode appears. The sequence is as follows: Video 1 --> Video 2 --> Computer --> Component 1 --> Component 2. Video1 Component2 4 Video2 PC Component1 Select a desired function • Select a desired title and function by using the Remote Control of VCR.
Connecting a Computer Connecting a Computer • DAEWOO PLAZMA supports resolutions of VGA, SVGA, XGA, SXGA, UXGA. • Before connecting a PC to PDP, be sure to adjust the resolution of PC. • This product is not supported by Plug and Play, so select Standard Monitor when setting computer monitor. 1 Before connecting to PDP, set the resolution of the computer. • Go to SETUP-CONTROL PANEL-DISPLAY PROPERTIES in Window Screen. • Choose the SETTINGS tab in the DISPLAY Menu.
Kinds of PC Input Resolution corresponding to PDP Resolution 30 Horizontal Frequency Vertical Frequency Remark
Customizing Picture Customizing Picture 1 Press the MENU button. • The MENU shown below will display on the screen. MENU • You can adjust color tone and brightness to your preference as desired. Normal Picture Mode Sound Brightness Screen Contrast Utility Color Input Tint Sharpness Color Temp. INPUT SELECT 2 VOL DISPLAY ZOOM- Previous Select Move POWER Press the / Normal button. • After selecting [Picture] by the / the button will display as follows.
Adjusting Screen Size 1 Adjusting Screen Size • You can adjust screen size or aspect ratio as desired. Press the SCALING button. • Each time you press the SCALING button on the Remote Control, a different picture mode appears. The sequences used are as follows: • The MENU shown below will display on the screen.
1 Press the MENU button. Adjusting from MENU screen • Press the [MENU] button on the Remote Control. MENU Normal Picture Mode Sound Brightness Screen Contrast Utility Color Input Tint Sharpness Normal Color Temp. Previous Select Move 2 Select “Screen”. • Press the Channel Picture / button to select “Screen.” Mode Normal Sound VOL VOL Screen Utility Input Previous Select Move 3 Select the Screen mode. • Press the Volume / Picture button to select “Scaling.
Adjusting Screen Position and Size Adjusting Screen Position and Size 1 Press the MENU button. • The MENU screen as shown below will appear. MENU • You can adjust the screen position and size as desired. • This function is only used when adjusting the screen position on the PDP monitor by using computer input signal. INPUT SELECT Normal Picture Mode Sound Brightness Screen Contrast Utility Sharpness Input Color Temp.
3 Press the Volume / VOL button. • Press the Volume / button to select “Scaling”. • While you are in ‘Screen’ mode, press or button to select a desired item, and then adjust. VOL Picture H. Size Sound V. Size Screen H. Position Utility V.
Enlarging Screen Size 1 Enlarging Screen Size • With this function you can view enlarged size of the screen. INPUT SELECT POWER DISPLAY ZOOM- ZOOM+ MENU VOL VOL PICTURE SCREEN MODE FREEZE MODE SOUND MUTE MODE 38 SLEEP Press the ‘ZOOM+’ button. ZOOM+ • Press the ‘ZOOM+’ button to show currently selected screen size. • Each time you press ‘ZOOM+’ button, the screen size will increase stepwise in 0 ~ 10 scale. • To reduce the screen size, press the [ZOOM-] button.
2 Move the Screen Position. VOL • While you are in ‘Zoom’ mode, press / , / buttons to move screen stepwise up/down, left/right, respectively. VOL NOTES: When the screen is enlarged, the pixel of the screen can become thick and dim.
Watching a Still Image 1 Watching a Still Image • With this function, you can view still images temporarily. However, displaying the same images such as still images for a long time may cause after-image lagging. INPUT SELECT Press the ‘STILL’ button. • If you wish to freeze a picture, press the ‘STILL’ button. You can still hear the sound. • Press any button to cancel the ‘STILL’ function. • To view the enlarged images, press the [ZOOM+] button. FREEZE POWER 2 Move the Screen Position.
Customizing Sound Mode Customizing Sound Mode 1 Press the MENU button. • The MENU Screen as below will be displayed. MENU • This selection can allow the user to adjust to his preference. Normal Picture Mode Sound Brightness Screen Contrast Utility Color Input Tint Sharpness Color Temp. Previous Select Move INPUT SELECT Normal POWER 2 Press the / button. • Select [SOUND] by / button, then pressing will display as shown below.
4 Select DOLBY SOUND Mode. • Select the Dolby Sound by pressing / button, then select ON/OFF by pressing button. • DOLBY SOUND: Used to feel grotesque by emphasizing middle and low sound. VOL VOL Picture Balance Sound Spatial Effect On Screen Sound Mode Normal Utility Input Previous Adjust Move 5 Select SOUND Mode. VOL • Select the Sound Mode by pressing by pressing / button.
Selecting INPUT SIGNAL INPUT SIGNAL • Used to select INPUT signal of external device connected to the PDP. INPUT SELECT 1 Press the INPUT SELECT button. INPUT SELECT • Press the [INPUT SELECT] button on the Remote Control or PDP Display to select [COMPONENT 1] or [COMPONENT 2]. • Each time you press the [input select] button, a different screen mode appears.
1 Press the MENU button. Adjusting from MENU Screen • Press the [MENU] button on the Remote Control. MENU Normal Picture Mode Sound Brightness Screen Contrast Utility Color Input Tint Sharpness Normal Color Temp. Previous Select Move 2 Select INPUT. • Select [INPUT] by VOL VOL / button. Picture PC Sound Component 1 (DTV/DVD) Screen Component 2 (DTV/DVD) Utility Video 1 Input Video 2 Previous Select Move 3 Select INPUT SIGNAL.
Checking the Current Input Signal Checking the Current Input Signal • Used to check INPUT signal mode, resolution, frequency, etc. of the current screen. INPUT SELECT 1 Press the CHECK button. • Press the [CHECK] button on the Remote Control. DISPLAY POWER 1. If you watch Digital Broadcasts: Displays which input terminal is used, and indicates signal mode. Indicates the horizontal and vertical resolution of current INPUT signal. DISPLAY Indicates the mode and frequency of current INPUT signal.
Selecting MENU Background Screen and Languages 1 Press the MENU button. Selecting Languages • The MENU screen will be displayed as below. MENU Picture Mode Sound Brightness Screen Contrast Utility Color Input Tint Normal • Used to select transparency of the MENU background screen and language used in MENU. Sharpness Normal Color Temp. Previous Select Move 2 Press the / button. • Select the [FUNCTION] by VOL VOL / button.
Selecting MENU Background Screen and Languages INPUT SELECT POWER 4 Select MENU LANGUAGE SELECT by VOL / button. • Select MENU LANGUAGE SELECT by / button. • Every press of button while you are in [MENU LANGUAGE SELECT] mode would cycle through the different languages.
Setting Sleep Timer 1 Press the SLEEP TIMER button. SLEEP • Press the [SLEEP TIMER] button on the Remote Control. • Pressing the [SLEEP TIMER] button first time will display the current setting for SLEEP TIMER. • To cancel the SLEEP TIMER, press button to select ‘OFF’. VOL Setting Sleep Timer • SLEEP TIMER turns the Monitor off after a preset time.
Before Requesting Service Before requesting service from the nearest Daewoo Electronics Service Center, check he following points once again. • Remote control does not function properly. • The Display makes a snapping sound. • There are empty spots in the top and bottom area of the screen. • Check for any obstacle between the Remote Control and the Display. • Check for dead batteries and incorrect battery orientation. • Check if the Remote Control is right one. • Check if pictures and sound are normal.
In the event that the product has been submerged in the water in rainy season: Immediately wash it with clean water, and dry in shadow place, then call for service from the nearest DaeWoo Service Center. Never plug the Power Cord since there is risk of electric shock and of damaging the product. SPECIFICATIONS DISPLAY UNIT Model DSP-4280GM Diagonal Size 106cm (42”) Screen Aspect Ratio 16 : 9 Display Resolution 853(H) 480(V) dots Pixel Pitch 1.08(H) 1.
