Wireless Bluetooth Bookshelf Speakers Instruction Manual Please read these instructions fully before using and keep for furture reference.
QUICK START GUIDE 1.Make sure to remove ALL items before discarding package. This includes: -Speaker×2 -Audio Cable -Instruction Manual 2.Turning the unit ON: 1. Press the POWER button of the main speaker , and then press the STANDBY button to wake up the unit, the Bluetooth/ standby indicator will flash blue. 2. Press the POWER button of the vice speaker , and then press the STANDBY button to wake up the unit, the Bluetooth/ standby indicator will flash blue. 3.
CONTENTS Safety Instructions................................................................................1 Buttons and Controls.............................................................................3 General Operation................................................................................4 Bluetooth Operation..............................................................................4 AUX IN Operation.................................................................................
SAFETY INSTRUCTIONS Before using the unit, be sure to read all operating instructions carefully, please note that these are general precautions and may not pertain to your unit. For example, this unit may not have the capability to be connected to an outdoor antenna. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 2 0. Read these instructions - All safety and operating instructions should be read before the product is operated.
21. Replacement parts - When replacement parts are required, be sure the service technician uses replacement parts specied by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in re or electric shock or other hazards. 22. Safety check - Upon completion of any service or repairs to this product ask the service technician to perform safety checks to determine that the product is in proper operating condition. 23.
BUTTONS AND CONTROLS Main Speaker 1. Volume knob 2. Standby button 3. Bluetooth/ standby indicator 4. Battery indicator 5. AUX IN port 6. 10V Input port 7. Power button 1 2 STANDBY AUX IN 3 4 5 DC 10V 6 POWER 7 Vice Speaker STANDBY 8 9 10 DC 10V 8. Standby button 9. Bluetooth/ standby indicator 10. Battery indicator 11. 10V Input port 12.
GENERAL OPERATION Overview: 1. Before first use, it is recommended to charge the Speakers via the Micro USB Input Port with the supplied Micro USB Cable & Power Adaptors(seeBattery Charging below). Each Speaker will take approximately 5-6 hours to charge from 0-100%. 2. Very Important: The Speakers MUST be allowed to automatically pair together BEFORE being synced to a Bluetooth enable device. Turning the unit ON: 1.
BATTERY CHARGING 1. Recharge the internal battery by inserting the supplied Micro USB Cable into the DC 10V Input port on the side of the speaker. Connect the other end to a PC or the included Power Adaptor with 10V,1.8A output. The Battery indicator will remain lit red while charging. The Battery indicator will turn no color when the battery charging process is completed. Charging will take 5-6 hours, depending on the charging source.
IMPORTANT INFORMATION FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
7