User's Manual

ManualsBrandsDONGGUAN ALLLIKE ELECTRONIC ManualsElectronicsTower Stereo System

REMOTE CONTROL AND GENERAL OPERATION

Remote Control

When the distance required for operation between the

remote control and Tower Stereo decreases, it is

necessary to replace the batteries with new ones. The

remote control is powered by 2 AAA batteries. To

replace the batteries, remove the battery cover on the

back of the remote and remove the old batteries.

Replace with two new batteries according to the

indicated polarity. Place the battery cover back on the

remote.

Battery Precautions

• Be sure to insert the batteries with correct positive

“+” and negative “-” orientation. ALWAYS use

batteries of the same type. Never mix different types

of batteries together.

• When using rechargeable batteries, refer to the

precautions on their labels.

• When the remote control unit is not to be used for

extended periods of time (more than a month),

remove the batteries to prevent them from leaking.

• Do not heat or disassemble batteries, and NEVER dispose of old batteries by throwing

them in a ﬁre.

General Operation

PREPARATION

Before turning the unit ON, make sure all connections have been made safely and

correctly, then connect the main power. Press the Power Switch to power the unit ON.

STANDBY MODE

Press the Standby button to wake up the unit or place it in standby mode.

SELECT MODE

Press the Source button to switch between modes: FM, Bluetooth or Audio.

VOLUME SETTING

To adjust the volume level, brieﬂy press the Volume+/- buttons.

MUTE THE SOUND

Press the Mute button on remote control to mute the sound. Press the Mute button

again, or press the Volume+/- buttons, to resume the volume level.

SKIP TRACKS

Press the Previous or Next button on the remote control to skip to the previous or

next track. You can also press and hold the Previous or Next button on the main panel

to skip tracks.

PLAY/PAUSE/SEARCH BUTTON

1. Play/Pause: Press the Play/Pause/Search button on the remote control or main

panel of the unit to pause music playback. Press again to resume.

2. Search Stations: In Radio mode, press the Play/Pause/Search button on the remote

control or main panel of the unit to automatically search for stations.

STANDBY

MUTE

SOURCE

VOLUME–

PLAY/PAUSE

VOLUME+