User's Manual
8
The turntable will begin to turn.
7. When the record reaches its end, tone arm will stop at the center of the record and you must lift
and return the tone arm to the tone arm rest manually. Lock the tone arm-rest holder to protect
the tone arm.
Important:
- Closing the top cover will help prevent dust from settling on the turntable.
- Always relock the tone arm clip before transporting the unit.
- Do not place anything on top of the turntable cover, especially while playing a record.
Listening to a CD
1. Select “CD” function.
(Note: When no disc is set, “no” will appear on the display.)
2. Press the OPEN/CLOSE button
(Note: This button only works in CD mode.)
3. Place a disc on the tray with the printed label face up.
4. Press the OPEN/CLOSE button to close the tray.
5. Press the PLAY/PAUSE button ( ) to begin playback.
(Note: The CD playback will start automatically.)
6. To temporarily pause playback, press the PLAY/PAUSE button ( ). Press again to resume.
7. To skip tracks forward or
backward, press the corresponding skip button ( or ).
8.
T
o fast forward/ rewind within a track, press and hold down the corresponding skip button until
the
desired
position is
reached.
9.
To
stop
playback, press the
STOP
button
Important:
-
Never
place
more than
one
disc
on the tray.
-
The
disc
must be
placed
in the
center
of the
disc tray.
An incorrectly loaded
disc
can
permanently
damage the tray
door
mechanism.
-
Do
not push the
CD tray
–
always
use the
OPEN/CLOSE
button.
-
It takes
a
moment for the
unit to load
a
disc, during
which
all buttons
will be temporarily
deactivated.
Repeat
Playback
Each time the
REPEAT
button is
pressed, the
repeat mode
will cycle through the following
options:
REPEAT
1(Repeat one track)
The
repeat indicator
will flash
and
the
current track
will be
played
repeatedly. If you
press the
(
or
)
button to
select another track, the track
you
select will
be
played
repeatedly.
REPEAT
ALL
(Repeat
the
entire
CD)
The
repeat indicator
will
stay
lit
and
the
entire
CD
will be
played
repeatedly.
Notes:
-
Repeat playback
works
with
CD
discs
only.
Programmed
Playback
Up to
20 tracks
can
be
programmed
to
play
in the
desired
order.
Notes:
-
Programmed
playback
works
with
CD
discs
only.
1.
Select
“CD”
mode, then load
a
CD.
( )
( )