Specifications
5.耐候性能
WEATHERING
PERFORMANCE
跌落试验
Drop test
在遥控器装有电池的条件下，
不带包装，从80cm 高度自由
跌落在不小于3cm厚木板上，
遥控器的跌落面应与冲击面平
行，每个面(共6个面)各跌落
三次
Under the condition of
remote control with
batteries, without
packing, free fall on a
height of 80 cm on the
plank thicker than 3cm,
the fall of the remote
control surface should be
parallel to the strike
face, each side ( total 6
sides) fell three times
结构应无断裂，功能正常
The structure should be
faultless,all functions should
be normal
耐温水
Heat water resistance
能耐60℃的温水，60℃的温水
滴在遥控器表面三个不同的部
位上包括字符图形符号部位，
用软布擦干
It can withstand 60
degrees of warm water, 60
degrees of warm water
dripping on the surface of
the remote control three
different parts including
characters and symbols ,
then wipe with soft cloth.
遥控器的表面色调不起变化
，
字
符标志不被擦掉
The surface color of the remote
control should not change, and
character marks should not be
erased.
字符、标志、涂饰部
分的附着力
The adhesion of
characters, signs, and
finishing parts
用粘附力为2‐3.5N/cm的透明
胶带粘遥控器的字符、标志和
涂饰部分
Use the adhesive tape with
2 to 3.5N/cm to stick the
character, logo and
finishing part of the
remote controller.
无脱落现象
耐溶剂性
Solvent resistance
1.用浸有20%的食盐水、无水
乙醇分别擦拭遥控器表面三个
不同部位上包括字符图形符号
部位30次
Wipe three different parts
on the surface of the
remote control
respectively with 20% salt
water and anhydrous
ethanol, including the
symbol parts of characters
and figures 30 times
2.将食用油用滴管滴在遥控器
表面三个不同部位包括字符图
形符号部位，1h 后用软布擦
干
Drop the cooking oil into
three different parts on
the surface of the remote
control, including the
characters and symbols.
Dry with a soft cloth
after 1h
表面硬度和外观无异常
字符图形
符号清晰
正常
正常正常
正常
3M胶纸粘贴,按压垂直拉起,
95%酒精粘软布,500g重力垂直，
对丝印字符来回30次摩擦
＞100次。合格
LOGO＞100次 硅胶
Paste with 3M adhesive tape,
press and pull vertically,
repeat three times. No falling off
重复三次,
黑色OK键＞200次
其它硅胶丝印按键
95% alcohol adhesive soft cloth, 500g
gravity vertical, 30 times friction
on silk screen characters, no abnormal
surface hardness and appearance,
clear character graphic symbols
Logo > 100 times,
silica black OK
key > 200 times,
other silica screen
printing keys
> 100 times.
qualified