Use Instructions

Do not repair or replace any part of the machine yourself (unless specifically
instructed in this manual). Please complete the repairs to your dealer or authorized
agent.
2
Laser hole
3
LED indicator
1
Switch
11
volume -
10
volume +
8
USB-A/Type-c Receiver
4
Hyperlink/Enter/Tab
5
Page up/Full screen
6
Page down/Black screen
7
Laser button
Instructions for use
This product is an electronic product specially designed for computers and
multimedia projection. In addition to the traditonal laser pointer function, it can
also remotely turn the computer remotely by simple pressing the page up and
down buttons. Operation, users can move freely in the classroom or presentation
hall, closer to the audience, increase good interaction, freely flip the page in a
static state, and get wonderful results. Widely used in product demonstrations,
e-learning, conferences and training and many other occasions.
Product Introduction
Insert the bottom receiver into the computer with USB interface or Type-c
interfaceafter putting the battery into the product, then open the button on the
product, open the PPT file at the same time, and point at the curtain or other
display device to start the demonstration.
Function Description
Product specifications
(1) Do not disassemble, bump, crush or throw it into fire!
(2) If severe swelling occurs, do not continue to use it!
(3) Do not place in high temperature environment!
(4) Donnot use the laser to directly shine on yourself or others’ eyes, otherwise it
will cause serious damage to the eyes!
Cautions
(1) Main material: ABS
(2) Working frequency:2404MHz, 2424MHz, 2453MHz
(3) Laser control distance:<200m
(4) Remote control distance:50m+
(5) Laser color: red laser
(6) Laser wavelength:635-650nm
(7) Battery type: 1pcs AAA battery
(8) Operating system: Windows, Mac OS, Linux, etc
(9) Compatible interfaces: USB-A interface,Type-c interface
(10) Product size: 143*22*14mm (±2mm )
lnstruction
PRESENTER
激光遥控翻页笔说明书
使用产品之前,请仔细阅读本说明书，并
妥善保管以供日后参考。
本产品是专门为电脑及多媒体投影设计的一款电子产品，它
除了具有传统的镭射教鞭的功能之外，还可以通过简单地按动上
下翻页按钮，以无线的方式遥控电脑进行远程的翻页操作。广泛
用于产品演示，电化教学，会议及培训等众多场合。
产品简介
将电池放入产品中后，将底部接收器插入USB接口或者
Type-c接口的电脑上，打开产品的开关键，同时打开PPT文件
对准幕布或者其他显示设备即可开始演示。
功能说明
1.禁止拆卸、撞击、积压或投入火中！
2.若出现严重膨胀，请勿继续使用！
3.请勿至于高温环境中！
4.禁止将激光直射自己或他人的眼睛，否则会对眼睛造成严重损伤！
警告事项
产品规格
1.主要材质：ABS
2.工作频率：2404MHz, 2424MHz, 2453MHz
3.激光距离：<200m
4.遥控距离：50m+
5.激光颜色：红光
6.激光波长：635-650nm
7.电池类型：1 pcs 7号 电池
8.支持系统： Windows,Mac OS,Linux等
9.兼容接口：USB-A接口，Type-c接口
10.产品尺寸：143*22*14mm (±2mm )
请勿自行对本机器进行维修，或是更换其中任何零件（除非
本手册有特别指示相关做法）。请将维修事宜完全交给您的经销
商或是授权代理商。
2
激光出口
3
指示灯
1
开关键
10
音量+
11
音量-
8
USB-A/Type-c接收器
4
单击选中超链接
双击打开超链接
长按切换当前窗口
5
单击上翻页
长按全屏/退出全屏
6
单击下翻页,长按黑屏
(仅在全屏模式下可黑屏)
7
激光按键
使用说明
lnstruction
PRESENTER
Wireless Presenter
Before using the product, please read this manual carefully and
Keep it properly for future reference.