Users Manual

2
5
Low battery indicator
6
Red pilot light
7
Temperature switch button: °C/°F
8
Sliding switch 1 2 3: Set sensor number
(transmission channel)
9
Battery compartment
10
Loop for hanging
1. Remove the battery compartment cover on the front
of the wireless sensor.
2. Insert 2 LR6 (AA) / 1.5 V batteries (not included)
facing in the direction indicated on the bottom of the
battery compartment. Make sure that the poles of the
batteries are correct (+/-). As soon as the wireless
sensor is receiving power, the red pilot light will light up
and thus display that data is being transmitted to the
base unit.
3. Put the battery compartment cover back in place.
- Do not use batteries that have a voltage that is too low
(only 1.2 V instead of 1.5 V). This affects the accuracy of
the measurements, among other things.