User's Manual

PRODUCT ASSEMBLY AND TESTING
1.Static Stimulation Column and Test
①Tighten the column screw into the screw hole of the receiver.
②Put on the conductive silicone cap.
③Insert the test light on the silicone cap.
④Press the static stimulation button of the transmitter.
⑤The test light shows red as static stimulation function is on.
2.Receiver Collar Fitting
Fit the receiver collar correctly to ensure effective
operation. Please follow the steps below to fit it:
A.Check if the receiver is turned off and keep the dog in a
comfortable standing position.
B.Place the receiver in the middle of the dog’s neck with the
switch button facing upward. When properly fitted, you should
be able to fit a finger snugly in between the collar and dog’s
neck. An overly loose or tight fit can compromise the
product’s normal function.
7