Quick Start Guide

ManualsBrandsDongGuan DYscan Technology ManualsPOS EquipmentBarcode scanner

V1.2

Wireless Barcode Scanner

Quick Start Guide

Use instructions

All the functions of this barcode scanner are set by

scanning the setting barcodes. First, scan "enter

setup mode" barcode, and then scan the function

barcode to be set, then scan the "exit setup mode"

barcode after finishing setting. Some common func-

tion barcodes can scan the function barcode directly

to complete the setting. This kind of barcode identi-

fication is ★, such as "★ power display".

Enter Setup Mode

Exit Setup Mode

Restore Wireless Parameters

If in use of the process, accidentally scan to other

function settings code, which led to the scanning

function can not be usednormally, through the scan

initialization barcode to restore to the initialization

state.

Synchronous mode, the scanning data directly

through the cable or wireless transmission to the

computer, after the success of the scanning, it will

issue a low frequency short tone. If the transmission-

fails, issue a 3-channel low-frequency tone to alert. In

normal mode, if the transmission fails, the sweep of

the bar code will be lost.

★Synchronous Mode

If the barcode scanner works beyond the transmis-

sion range, it is recommended to use storage mode

In storage mode ; The scanned data is stored in the

internal memory of the scanner. After scanning a bar-

code, barcode scanner will send a short sound. The

scanned barcode will storage in the internal memory

of the scanner automatically.

Wireless Operating Mode

The barcode scanner has two operating modes: Syn-

chronous Mode and storage mode, through a differ-

ent set code to operate the mode switch:

a: First scan “Enter setup mode ”barcode

b: Scan the required operating mode barcode

c: Scan “Exit Set mode”barcode to switch the de-

sired mode of operation

If the internal storage is full, the scanner will send

three low-frequency short tone alarm.

★Storage Mode

By scanning this “ Sum Data” barcode, user can

check the barcode quantity in the internal memory of

the scanner.

★Sum Data

Upload the stored data by scanning the "Data

Upload" barcode. After the data is uploaded, the bar-

code stored in the barcode scanner is not automati-

cally deleted. The user uploads the storage data mul-

★Data Upload

Note: Please ensure that the wireless signal connec-

tion is good when the data is uploading. Or user can

upload the data by using the cable.

By scanning the "clear data" barcode to clear the

storage area of the barcode data, bar code will not

be able to upload after the clear,please confirm

whether the data has been uploaded.

★Clear Data

Match with the computer（2.4G）

FOR 2.4G matching steps, support xp, win7, win8,

win10, etc.

a: Start the scanner, scan “Enter Setup Mode” bar-

code

Enter Setup Mode

b: Scan 2.4G mode barcode

2.4G Mode

c: Scan the “Paired With Dongle” barcode, enter

the pair state, the left blue light will flash.

Paired With Dongle

d: Insert the receiver, hear a sound. It means pairing

is successful. The right blue light will always bright.

Exit Setup Mode

Match with Bluetooth terminal

FOR Bluetooth matching steps, support Android, IOS

system phone or PC with Bluetooth enabled PC ter-

minal)

Method 1:

a: Start the scanner, long press the button 8s, enter the

Bluetooth HID pairing mode. The left and right blue

light will flash alternately.

b: Turn on Bluetooth in the device and search for the

Barcode scanner HID

c: Click the Bluetooth device to enter the pairing state

d: Match success "Di" sound, the right blue light is

always bright

Method 2：

a: Start the scanner and scan “Enter Setup Mode”

barcode

Enter Setup Mode

b: Scan the “Bluetooth HID mode” barcode

Bluetooth HID Mode

c: Scan the “Paired With Dongle” barcode, enter

the pair state. The left and right blue light will flash

alternately. ( Or click the button double times to exit

setup mode, back to the scanning state.)

Paired With Dongle

d: Open Bluetooth in the device and search for the

Barcode scanner HID

e: Click the Bluetooth device to enter the match status

f: Match success "Di" sound, the right blue light is

always bright

g: Scan “Exit Setup Mode” barcode

Exit Setup Mode

Android, IOS system keyboard settings

(Bluetooth transmission function)

a: IOS keyboard out or hide

★Out Or Hide

b: Double click for out IOS keyboard

★Double click for out IOS keyboard

c: Double click for close IOS keyboard

d: Android System keyboard call out to the supplier

to obtain the Bluetooth input method APP

★Double Click For Close IOS keyboard

Communication mode switching

　 (optional)

a: Start the scanner and scan “Enter Setup Mode”

barcode

Enter Setup Mode

b: Select the desired communication mode barcode

2.4G Mode

Bluetooth HID Mode

Bluetooth SPP Mode

Bluetooth BLE Mode

c: scan”Exit Setup Mode”barcode

Exit Setup Mode

Language settings

a: Start the scanner and scan “Enter Setup Mode”

barcode

Enter Setup Mode

b: Select the desired keyboard language barcode

English

Germany

French

Spanish

Italian

Japanese

c: Scan”Exit Setup Mode”barcode

Exit Setup Mode

Sleep time settings

a: Start the scanner and scan “Enter Setup Mode”

barcode

Enter Setup Mode

b: Select the sleep interval barcode

Sleep Interval 30S*

Sleep Interval 5min

Never Sleep

Sleep Interval 30min

Sleep Immediately

c: Scan”Exit Setup Mode”barcode

Exit Setup Mode

Sound&Vibration Settings

a: Start the scanner and scan “Enter Setup Mode”

barcode

Enter Setup Mode

b: Select the desired to turn on / off the sound or vi-

brate the barcode

Turn Off The Sound

Turn On The Sound

Vibration Off(Optional)

Vibration On(Optional)

c: Scan”Exit Setup Mode”barcode

Exit Setup Mode

Led&Buzzer state description

LED Light

Left blue LED 1

Right blue LED 2

Red LED

Description

Flash briefly if scanning successfully

Wireless connection

Charging

Blue 2 off, blue 1 Flash quickly

Blue 1 off, Blue 2 Flash quickly

Blue 1 and Blue2 alternately flash

Blue 1 and Blue 2 Synchronize flash

quickly

2.4G pairing mode

SPP pairing mode

HID pairing mode

BLE pairing mode

Buzzer

A long Sound

A short sound(low frequency)

3 short sound(low frequency)

5 short sound(low frequency)

and stop scanning

2 short sound(low frequency)

2 short sound(high frequency)

Description

Power ON/OFF

Scan common barcode, or paired,

wireless connection success

Wireless transmission failor

buffer full

Battery without electricity

Wireless disconnection

Setup code scanning is not work

SZSC-9DS03.E120

Summary of content (2 pages)

PAGE 1
Led&Buz z ers t at edes cr i pt i on LED Li ght Des cr i pt i on Lef tbl ueLED 1 Fl as hbr i ef l yi fs canni ngs ucces s f ul l y Ri ghtbl ueLED 2 Wi r el es sconnect i on RedLED Char gi ng Bl ue2of f ,bl ue1Fl as hqui ckl y 2.
PAGE 2
FCC Caution： This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.