Users Manual

Take both earbuds out of the charging case and both earbuds will power on and start pairing automatically.[If
the earbuds are not connected to your device for more than 5 minutes, the earbuds will automatically turn off.
Press the MFB button for about 3 seconds to manually turn on the earbuds when prompted "Power on".
The indicator light of one earbud will flash red and blue alternately, and the indicator light of the other earbud
will slowly flash blue when paired successfully
Step 2 - Enable the Bluetooth pairing mode on your phone device, search and select "GW20S" to connect.
[You should hear a voice prompt "connected" when wearing earbuds. ǐ
If indicator light of earbud is off, it means the phone is connected
Automatic connection
By default, the earbuds will connect the last paired mobile automatically when power on.
Prompt
1. If you have any problem pairing the two earbuds with your phone, put the earbuds back in the charging
case and repeat the above steps.
2. These earbuds can be used not only together, but also individually. If you want to use single earbud, just
take one earbud out of the case and connect it to your phone. Or when using two earbuds, manually turn off
one earbud or put one back in the charging case and you'll be able to use the other one earbud alone.
Functions
Telephone Communication
answer call ----- tap once
hang up ---- press and hold the key for two seconds
refuse incoming call ---- press and hold the key for two seconds
For Music
Play/pause ---- tap twice
previous track ---- press and hold "L" for two seconds
next track ---- press and hold "R" for two seconds
Activate Siri ----- Quick tap for three times
turn down volume --- single tap on right earbud
turn up volume --- single tap on left earbud
Charging
Earbuds Charging