User's Manual

Voice Dialing
In the standby mode, press the Bluetooth headset multi-function button once to activate
the voice dialing function.
Redial
Redial the last call and double click (twice quickly) the multi-function button to achieve the
redialing function.
Default Settings
Charge it and press the volume+/- at the same time, the blue and red lights flicker 2 times
alternately, then the Bluetooth headset complete Default Settings.
Power off
Push the switch to turn the headset off until the red light flicker one time, then the device is
powered off.
Indicator Lamp Status
Power-on: Blue light flickering 3 times.
Power-off: Red light flickering once.
Pairing mode: Blue light
Standby mode: Blue light flickering once every 7s.
Battery Capacity Low: Red light flickering 4 times and alert once "Beep" each 20s.
Charging: Red light on.
Charging over: Blue light on.
Appendix
Frequently asked questions
1.Will my headset work with laptops, PCs and PDAs?
Your headset will work with devices that support your headset’s Bluetooth version and
profiles.
2.Why do I hear static or interference while on a call?
Appliances such as cordless phones and wireless networking equipment may cause
interference, which usually sounds like static. To reduce any interference, keep the
headset away from other devices that use or produce radio waves.
3.Will my headset interfere with my car’s electronics, radio or computer?
Your headset produces significantly less power than a typical mobile phone. It also only
emits signals that are in compliance with the international Bluetooth standard. Therefore,
you should not expect any interference with standard consumer-grade electronics
equipment.