User's Manual

Sports Bluetooth Earphones
Start Up
Multi-Points Connection
1. Refer to How to Connect to connect with phone1 then
turn off the Earphones.
2. Hold MFB until LED blinks red and blue. On phone2,
search for QCY-QY33 and tap to connect.
Three-Way Calling and Switch Between
two Calls
Tap MFB to answer incoming call on phone1. If there is
another incoming call on phone2 meanwhile, tap MFB to
activate call on phone2 while put the first one on hold.
Double tap MFB to switch between active and held calls.
Play/Pause
When standby, tap MFB to play and tap it again to pause.
Bluetooth version: V4.1
Operation range: 10m
Charging time: 1 or 2hr
Standby time: approx. 220hr
Music time: approx. 8hr
Bluetooth profile: HFP/A2DP/HSP/AVRCP
Battery capacity: 3.7 120mAh
Battery type: li-ion
Input parameter:5V 100mA
Weight: 13g
CSR Bluetooth V4.1 offers you with new experience
in wireless world.
Battery with large capacity provides up to 8 hours
calling.
Sophisticated water-proof makes the earphones
sweat resistant in workout.
Voice Assistant
When standby, hold MFB for 1s to activate voice assistant
(like Siri).
Switch Audio Output Between Earphones
and Cellphone
Hold MFB for 1s when calling.
3. Once connection with phone2 has been done, re-confirm
connection with phone1. Now multi-points connection has
been finished.
Phone2
Phone1
How to Connect
Features
Basic Parameter
How to Charge Function
Factory Setting
Hold MFB to trigger pairing mode(LED blinks red and
blue promptly).
Low battery will be warned by red blinking LED and voice
prompt. LED will be solid red, when charging and turn to
blue once fully charged.
Tap MFB to answer incoming call(LED blinks blue promptly).
Answer Call
Double tap MFB when standby.
Notes: last number dialing out may vary with different cellphone
systems.
Last Number Redial
When listening to music, hold +/- to skip track
forward/backward.
Skip Track
Double tap MFB when calling.
Mute on
Tap +/- when calling or listening to music.
Volume Control
Hold MFB for 1s to to ignore incoming call(LED blinks
blue promptly).
Ignore Call
When charging, hold MFB until LED blinks red and blue.
On cellphone, search for QCY-QY33 and tap to connect.
For the first time use, the pairing mode will be auto triggered
once powering on. Otherwise, please hold MFB until LED blinks
red and blue.
Vol+
LED
Hold
Hold
Hold
Hold
Hold
Tap
Tap
Double tap
Double tap
MFB
Vol-
USB port
Tips
1. Please read this manual carefully prior to using the
device and keep the manual properly.
2. For the first time use, please fully power up both
cellphone and charger.Low battery of charger will
cause red LED solid of the charger or the charger
can not power up for earphone. So please power
up the charger before using.
3. Please be sure that your Bluetooth earphone is in
"pairing mode", if it can not be spotted by cellphone.
As the device will exit "pairing mode", if unpaired or
unconnected for a long time. You may need to set
it to "pairing mode" again. Supposing any program
error occurs in cellphone or this device, please restart
cellphone or this device, or reset this device to factory setting.
4. White LED will be solid during charging while off once
fully charged, the charging process will last about
2 hours.(Bad contact caused by improper operation
or other reasons may switch off white LED even when
charging, which results in incomplete charge. So
please plug in the charger properly and keep stable
charging until white LED is off.)
This form is made by SJ/T 11364 regulation.
O：means that hazardous substance content in the homogeneo
us materials of this part is within the limitsof GB/T 26572
regulation.
X ：means that hazardous substance content in, at least,one
certain homogeneous material of this part is beyond the
limits of GB/T 26572 regulation.
Lifespan:
As the booklet states, the eco-lifespan of the item is 5 years
while using it in normal ways. During the period, no dangerous
material will be leaked. The item must be recycled by the
local law.
Hazardous substances and their contents in the item
（Pb） （Hg）
（Cd） （Cr(VI)）（PBB）
（PBDE）
Hazardous Substances
Part Name
Main body
Battery
Ear tips
Accessories
Charging cable
Caveats
1.Never disassemble or modify your headset for any
reasons to avoid any damages and danger.
2.Do not store the headset in extreme temperatures
(under 0℃ or over 45℃).
3.Avoid using the indicator close to the eyes of children
or animals.
4.Do not use this headset during a thunderstorm to avoid
irregular function and increased risk of electric shock.
5.Do not use harsh chemicals or strong deterge nts to
clean the headset.
6.Keep the headset dry.
Notes: Please arrange using time properly since your
hearing may be damaged by using the device for along
time.
For any after service, please contact local distributor
Perform standard:Q/HL 1-2016
Web: en.qcy.com
Manufacturer: Dongguan Hele Electronics Co.,Ltd.
Address: Dalingya Industrial Zone, Daojiao Town,
Dongguan City, Guangdong Province(QCY
Environmental Zone, Dalingya No.5, Yuehui
Road)
After Service and Support
1.Warranty Period
1)Returning: 1 year after you purchase this item.
2)Repairing: 2 years after you purchase this item.
2.Free Returning will Only be Accessed under All of
Following Circumstances
1)1 year after you purchase this item.
2)Three completed guarantee receipts have to be provided
to distributor(item model No., sales date and item serial
No. shall be displayed on invoice and warranty card).
3)Required item has to be with full package and accessories.
4)Malfunction has to be caused by quality deficiencies.
Notes:Exchanged item will have the same model No. and
spec. as your required one’s.
3. Free Repairing will Only be Accessed under All of
Following Circumstances
1)2 years after you purchase this item.
2)Three completed guarantee receipts have to be provided
to distributor(item model No., sales date and item serial
No. shall be displayed on invoice and warranty card).
3)Malfunction has to be caused by quality deficiencies.
Free repairing & returning will not be accessed under
following circumstances
A: Item is out of warranty period or effective sales receipt
and warranty card fail to be provided.
B: Breakdowns of housing, bags, gifts and accessories or
any non-functional faults.
C: Unauthorized disassembly, breakdowns caused by improper
operation or using in environment which is forbidden
in user’s manual.
D: Artificial damages(including but not limiting to leaking,
damped, dropping off, squeezing, breaking, burning
and distortion).
E: Faults caused by force Majeures(such as earthquake,
fire and flood).
QCY-QY33
QCY-QY33
BLUETOOTH
a.m.
Turn on Bluetooth
Visibility
Device name
Visible to all Bluetooth devices nearby
Available Devices
Available Devices
QCY-QY33
QCY-QY33
BLUETOOTH
a.m.
Turn on Bluetooth
Visibility
Device name
Visible to all Bluetooth devices nearby
Available Devices
Available Devices
QCY-QY33
QCY-QY33
BLUETOOTH
a.m.
Turn on Bluetooth
Visibility
Device name
Visible to all Bluetooth devices nearby
Available Devices
Available Devices