Product Specs

Model：H18
Product name:
Light night bluetooth speaker
Product specification
Technical parameters
Output power: 5W charging input: 5V/ 1-2a transmission distance: 10m
Keystroke operation
1. Long press the button for on/off, enter night light mode, and breathe through
colorful lights. If TF card is inserted, enter the playback mode of TF card. If the TF
card is not inserted, enter bluetooth standby mode. Short press the button
to
switch between play and pause.
2. Short press the button
to reduce the volume, long press the button to
switch to the previous track.
3. Short press the button to increase the volume, long press the button to
switch to the next track.
4. Press the button
to select a single light color, and press the button
continuously to the red light to enter the breathing state of the colorful light cycle
again. Long press to switch bluetooth and TF card modes, and voice prompt is
available for switching.
Bluetooth connection and pairing
1. After the night light enters bluetooth mode, search available devices. When the
available devices display H18 characters, it means that the night light bluetooth
speaker has been searched.
2. After successful bluetooth connection, users can switch between bluetooth and
TF card mode by themselves. When switching to bluetooth mode again, bluetooth
keeps the connection by default but is in the state of play suspension.Short press the
button
or operate at the terminalfor playing.
FCC Statement
Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
FCC ID: 2AS3AH18