Quick Start Guide

QUICK START GUIDE
Guía de Inicio Rápido
STEP 3
WIRELESS
PARTY
SPEAKER
SPECIFICATIONS HEADPHONE CONTROLS
BLAST THE SOUND!
Flip the switch on the Party Speaker to turn
ON/OFF.
Mueve el interruptor del Party Speaker para
encenderlo o apagarlo.
Use the + and - buttons to adjust volume,
skip songs, or switch stations.
Usa los botones + y - para ajustar el volumen,
saltar canciones o cambiar de estación.
Use the PLAY/PAUSE button to control
music, answer, end or decline phone calls,
scan FM stations, and enter/exit TWS
pairing.
Usa el botón REPRODUCIR/PAUSA para
controlar la música, contestar, nalizar o
rechazar llamadas telefónicas, escanear
Dimensions (w x h x d): 7 x 10 x 7 in
Dimensiones (ancho x alto x profundidad): 7 x 10 x 7
pulgadas
Music Operating Time: 15 H (at 50% volume)
Tiempo de funcionamiento de la música: 15 h (al 50% del
volumen)
Phone Operating Time: 15 H (at 50% volume)
Tiempo de funcionamiento del teléfono: 15 h (al 50% del
volumen)
Charging Time: 3-4 H
Tiempo de carga: 3 a 4 horas
Bluetooth Standard: JL V5.0
Estándar de Bluetooth: JL V5.0
Operation Range: 32 ft
Rango de operación: 32 pies
© 2021 All rights reserved. Alpha Comm and Quikcell are registered trademarks of Alpha Comm
Enterprises. All other trademarks are the property of their respective owners. Designed by Alpha Comm
Enterprises at 1500 Lakes Parkway; Lawrenceville, GA 30043.
Diseñado por Alpha Comm Enterprises en 1500 Lakes Parkway, Lawrenceville, GA 30043.
ONE YEAR LIMITED WARRANTY
For warranty information, please visit
Para obtener información sobre la garantía, visite
quikcell.com/warranty
FLIP OVER
STEP 4
Easily turn your light show ON/OFF by long
pressing your Mode button.
Enciende/apaga fácilmente tu espectáculo
de luces presionando prolongadamente el
botón Modo.
LIGHT UP!
1. Mode [M] Button
• Short Press = switching between BT, line-in,
and FM connections
• Long Press = LED lights on/off
1. Botón de modo [M]
• Pulsación corta = cambiar entre conexiones BT,
line-in y FM
• Pulsación larga = luces LED encendidas/apagadas
2. [+] Button
• Long Press = increase volume
• Short Press = skip to next song, or play next
radio station when in FM mode
2. Botón [+]
• Pulsación larga = subir el volumen
• Pulsación corta = saltar a la siguiente canción, o
reproducir la siguiente estación de radio cuando está
en modo FM
3. [–] Button
• Long Press = decrease volume, or play previous
radio station when in FM mode
• Short Press = skip to previous song
3. Botón [–]
• Pulsación larga = bajar el volumen o reproducir la
estación de radio anterior cuando está en modo FM
• Pulsación corta = saltar a la canción anterior
4. [Play, Pause, Answer] Button
• Short Press = play/pause music & answer phone
calls, scan FM stations
• Double Press = enter/exit TWS pairing
4. Botón [Reproducir, Pausar, Responder]
• Pulsación corta = reproducir/pausar la música y
contestar llamadas telefónicas, buscar estaciones de FM
• Doble pulsación = entrar/salir del emparejamiento TWS
Wireless Party Speaker
PARTYSPKER
Alpha Comm Enterprises Inc.
1500 Lakes Parkway Lawrenceville GA 30043.
1-888-951-0909
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Voltage: DV 5V
Voltaje: DV 5V
Output Power: 10W
Potencia de salida: 10W
Battery Type: Lithium Ion 1200mAh
Tipo de batería: Ion de litio 1200mAh
"Dispositivo Bluetooth emparejado correctamente" y la
luz indicadora LED se iluminará en azul jo. ¡Tu
dispositivo ahora está emparejado correctamente!
56 7 8 9 10
11
5. [ON/OFF] Switch
5. Interruptor [ENCENDIDO/APAGADO]
6. AUX-In Jack
6. Conector de entrada auxiliar
7. Microphone Input
7. Entrada del micrófono
8. LED Indicator Light
8. Luz LED Indicadora
9. Micro-USB Charging Port
9. Puerto de carga Micro-USB
10. TF Card Port
10. Puerto de tarjeta TF
11. LED Light Show Light
11. Luz LED para espectáculo de luces
WHAT’S INSIDE
Portable Wireless Speaker
Altavoz Inalámbrico Portátil
Micro-USB
Charging Cable
Cable de Carga Micro-USB
1
2
21
2 34 1
STEP 1
Plug micro-USB into Party Speaker and USB
into a compatible port (such as a wall
charger, car charger, or computer). LED
indicator light will be RED while charging and
goes off when fully charged.
Conecta el micro-USB en Party Speaker y el USB
en un puerto compatible (como un cargador de
pared, un cargador de automóvil o una
computadora). La luz indicadora LED será ROJA
durante la carga y se apagará cuando esté
completamente cargada
*USB charging port not included
*Puerto de carga USB no incluido
CHARGING YOUR SPEAKER
Micro-USB Charging Port
STEP 2
On the front of your Party Speaker slide the
ON/OFF switch to ON. You will then see the
LED indicator light ashing blue and hear
“The Bluetooth device is ready to pair.” In
your devices Bluetooth settings look for
“PARTY SPEAKER” to appear as an option
and select. You will then hear “Bluetooth
device paired successfully” and the LED
indicator light will be solid blue. Your device
is now successfully paired!
En la parte delantera de tu Party Speaker, desliza
el interruptor de ENCENDIDO/APAGADO a la
posición de ENCENDIDO. A continuación, verás
la luz indicadora LED parpadeando en azul y
escucharás "El dispositivo Bluetooth está listo
para emparejarse". En la conguración de
Bluetooth de tus dispositivos, busca "PARTY
SPEAKER" para que aparezca como una opción
y selecciona. A continuación, escucharás
PAIRING YOUR DEVICE
LED Indicator Light
Mode
Button
estaciones de FM e ingresar/salir del
emparejamiento TWS.
FCC Warning
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be
used in portable exposure condition without restriction.
© 2021 – Designed and Submitted by Alpha Comm
April 5, 2021 – V1
Notes
– L x W x H = 3in x 3in
– Paper Color: matte Off White (Same as package color)
– Paper Weight: Card Stock 100lb
– Z-fold Brochure
Quikcell
Factory Instructions | Wireless Party Speaker Quick Start Guide
PMS 446c
C/M/Y/K: 71/53/55/53
PMS Cool Gray 8c
C/M/Y/K: 44/34/29/10
PMS 4054c
C/M/Y/K: 6/71/67/24
PMS Cool Gray 6c
C 33 M 24 Y 20 K 2