Installation Instructions

The user stands on the scale with bare feet to turn on the scale. Open the Bluetooth and ita
app of the mobile phone, and connect to the Internet automatically through Bluetooth. After
connecting, the weight displayed on the scale end and the weight displayed on the app will
be displayed synchronously, and the app will issue the set parameters.
Fat measurement mode
Open the cover of the battery compartment and install the attached 4 batteries in the direction
shown in the figure.
Install the battery
Please read this manual carefully before using the product and keep it properly.
Scan the following QR code to download and install the latest client.
Install client
When weighing, the "o_Ld" pattern flickers,
indicating that the weighing weight exceeds
the maximum range of 183kg.
When weighing, the "Lo" pattern flashes,
indicating that the battery power is low.
Please replace the battery in time.
Prompt symbol
If there is demand for after-sales service, please call Yitai service Tel. [phone]
or visit Yitai after sales service website http://www.czt-ita.com
Manufacturer: Dongguan Yitai Intelligent Manufacturing Technology Co. Ltd
Address: No.20, Nange West Road, Nanya village, dongdaojiao Town, Dongguan City
1.Please do not place the grease scale on the slippery floor to prevent slipping.
2.When weighing, both feet should stand in the middle of the scale.
3.Keep the environment dry and do not immerse the scale in water.
4.Keep away from organic solvents and other chemicals.
5.When the dry battery is exhausted, please take out the battery in time.
matters needing attention
Basic parameters
Product Name: Yitai Bluetooth body fat scale
Product model: ita-fbs200
Product size: 300 x 300 x 23.5mm
Net weight of product: 1.5kg
Weighing range: 3kg - 180kg
Weighing unit: kg LB st
Minimum Division: 0.1kg
Executive standard: Q / HM 02-2018
Shell material: toughened glass + ABS
Wireless connection: Bluetooth 5.0
Working temperature: 5 ℃ ~ 40 ℃
Power supply: 4 1.5V No.7 (AAA) batteries
Device requirements: devices running Android
4.4/ios 9.0 and above (iPhone 5S and above)
and supporting Bluetooth 4.0 and above
Start the ITA client, log in the ITA account, bind the body fat scale, and input the personal
information according to the prompts.
After binding the body fat scale, you can view the weighing record and body composition
information on the mobile phone
Binding body fat scale
When the weight is greater than or equal to 5kg.the machine will start automatically, and then
find the zero point. When the zero point is found.it will display 0.0kg, and it will be weighed on
the scale. Keep the value displayed for about 20s and then shut down. Before shutdown, it can
be weighed repeatedly without p value display.
Weighing mode
Push the cover
down
ITA
The body composition information provided by this product is for reference only.
not for medical advice
Bluetooth body fat scale
Model:ITA-FBS200
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions (1)this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.