How-To Guide

ManualsBrandsDongguan Jianyi Electronics ManualsComputers & Accessorieswireless keyboard

Single finger slipping Double finger sliding Double finger scaling

Touch the area at the lower

left, press with one finger as

left click, as shown in the

figure

Touch the area at the lower

right, press with one finger to

right click, as shown in the

figure

- 5 -- 3 - - 4 -

**Please read the instructions carefully before use**

A) A）Bluetooth keyboard case connection operation:

1. Turn on the power, the green indicator lights on for 1 second (if the indicator is red, please charge

in time)

Press the matching key "Fn+ " for 1 second, the Wireless indicator lights flicker into the pairing

state, and the effective time is about 120 seconds.

Open the Wireless search function of the external device, click the "Wireless Keyboard" searched.

After the pairing is successful, the indicator lights go out, and you can use the keyboard.

2. If it is not in use for 10 minutes, the keyboard will enter auto sleep mode. Please press any keys to

wake it up in 2-3 seconds.

B) Three-channel Bluetooth keyboard connection operation:

1. Turn on the power, the green indicator lights on for 1 second (if the indicator is red, please charge

in time)

Press the pairing key FN + or or hold it for

2 seconds, and the Bluetooth indicator

flashes into the pairing state. The effective time is about 120 seconds. Represents

three channels, Pair three channel devices in turn.

Open the Bluetooth search function of external devices, and click the "Wireless Keyboard" found.

After the match is successful, the indicator light goes off, you can use the keyboard.

2. If it is not in use for 10 minutes, the keyboard will enter auto sleep mode. Please press any keys to

wake it up in 2-3 seconds.

3. Press FN + or or to switch the keyboard between three-channel devices. When switching,

the Bluetooth light will light up, indicating that the switch is completed.

Keyboard instruction (EN)

- 1 - - 2 -

WINDOWS

Back To Home

Searching

Browser

Screenshots

Screen Brightness Down

ANDROID

Back To Home

Searching

Browser

Screenshots

Screen Brightness Down

IOS

Back To Home

Searching

Virtual Keyboard

Change Input Method

Screenshots

Screen Brightness Down

WINDOWS

Screen Brightness Up

Back

Play/pause

Forward

Mute

Volume Down

Volume Up

Lock Screen

Back

Windows

Lock/Unlock Trackpad

Cut

Copy

Paste

Lock the FN key (lock the light flashes twice; Unlock light flashes once)

ANDROID

Screen Brightness Up

Back

Play/pause

Forward

Mute

Volume Down

Volume Up

Lock Screen

Back

The function keys

Lock/Unlock Trackpad

Cut

Copy

Paste

IOS

Screen Brightness Up

Back

Play/Pause

Forward

Mute

Volume Down

Volume Up

Lock Screen

Cancel the input

CMD=Command

Lock/Unlock Trackpad

Cut

Copy

Paste

Charging interface Power switch

OFF/ON

Power Indicator Light

Wireless Indicator Light

Caps Indicator Light

Please refer to the following instructions according to the actual functions of the

purchased products : (Partial product support)

Touch the mouse: Different operating system, gesture command will be different, please

refer to the actual situation of the product.

Maintenance and warning:

* Do not squeeze or twist, clap the keyboard.

* Do not scan the microwave and get away from the magnetic field.

* Away from the liquid and used in a dry environment.

* Clean the keyboard with soft cloth, do not turn off the power for a long time.

* Other routine maintenance of electronic products.

Common connection Troubleshooting:

* Make sure the power is turned on and the battery is sufficient.

* Make sure that the keyboard is within the range of working distance.

* Make sure that the Wireless related function of the device has been opened.

* Make sure that the keyboard and the device have been paired.

* Clear device pairing record and turn off Wireless function; re match.

* Please do not connect multiple Bluetooth keyboards at the same time; if necessary,

please connect one by one.

** This product will not be updated in time for continuous product improvement. If there is

any discrepancy, please refer to physical products.

Working Voltage: 3.0V~4.2V Working Current: ≤3.0mA

Working Time: ≥80 Hours Low Voltage Alert: 3.0~3.3V

Sleeping Current: ≤0.3mA Battery Standby Time: ≥100 Days

Battery Capacity: ≥150mAh Keystrokes: 50g~70g

Keyboard Lifetime: 300 Mlillion Times Charge Input: 5V, 500mA

Connect Distance: 10m Charging Time: 2~3 Hours

Charging Current: 150~300mA Awaken Time: 2~3 Seconds

Charging Port: TYPE-C Working Temperatur: -10°C~+55°C

Matching Password: No

Basic parameters: (part of the parameters are objective factors will vary).

How to adjust the backlit keys:

By pressing , you can (turn on/Adjust the brightness/turn off) the luminous function of

the keyboard.

If in the off state, press to turn on the luminescence, then press the brightness to increase

20%, then press the brightness to increase 20% again, then press again to turn off the

luminescence; Loop through.

FN+ can adjust the luminous color, and switch between different colors in turn.

Note:

If the light can not be lit, or immediately after the light off, please timely charge; If the

battery capacity is below 20%, the keyboard will force this function off.

Special notes:

The battery capacity of the keyboard with light emitting function is

650mAh. When the

battery capacity is 100%, the working time of turning on light emitting function is about 5~6

hours (related to brightness). The working time of turning off the light is about 300 hours.

Note: please refer to the following instructions according to the actual functions of the keyboard:

(Partial product support) Please select the input program from the system of the corresponding device,

press "FN+And/ Win/ IOS" for 1 seconds to switch, And the bluetooth light will light up when the switch

is successful.

Fn+And is converted to Android ; Fn+Win is converted to Windows; Fn+iOS is converted to iOS.

Disconnect the keyboard connection:

* If you want to break the connection between keyboard and device, please clear the

pairing information in the device, or turn off the keyboard power directly.

Electricity indicator:

* If the power indicator light is red slowly, the power is low, please charge it in time, the

red light is bright when charging. When the indicator is green, it is full, please

disconnect the charging power to ensure safety.

Function key: when the key has more than one character or function icon, press Fn or

Fn+Shift.

Note: Based on the open source nature of the operating system, different brands of

devices may have some function keys inconsistent with the table or unresponsive.

Use unusual characters together with “Option” in IOS. Use “Alt Gr” in WIN/AND.

77.18.00111_211009

Summary of content (5 pages)

PAGE 1
Keyboard instruction (EN) 77.18.00111_211009 **Please read the instructions carefully before use** OFF/ON Caps Indicator Light Power Indicator Light Charging interface Power switch Wireless Indicator Light 1. Turn on the power, the green indicator lights on for 1 second (if the indicator is red, please charge in time) Press the matching key "Fn+ " for 1 second, the Wireless indicator lights flicker into the pairing state, and the effective time is about 120 seconds.
PAGE 2
Bedienungsanleitung für Bluetooth Tastatur Hülle(DE) Tastatur: (Teilweise Produktunterstützung) **Bitte lesen Sie die Bedienungsanleitung vor der Verwendung sorgfältig durch** OFF/ON Anzeige für schwache Batterie Bluetooth-Anzeige Großbuchstabenanzeige Ladeanschluss Hinweis: Bitte beachten Sie die folgenden Anweisungen nach der tatsächlichen Funktionen der Schalter Bitte wählen Sie das Eingabeprogramm aus dem System des entsprechenden Gerätes,drücken Sie "FN + And / Win / IOS" für 1 Sekunden, um zu
PAGE 3
Instructions d’ utilisation du clavier (FR) Note: veuillez consulter les instructions suivantes en fonction des fonctions réelles du clavier: ANDROID IOS Augmentation de la luminance Augmentation de la luminance Augmentation de la luminance Titre précédent Titre précédent Titre précédent Pause de diffusion Pause de diffusion Pause de diffusion Le dernier Le dernier Le dernier silencieux silencieux silencieux Indication de la quantité d’ électricité: Réduction du volume Réduction du volu
PAGE 4
键盘使用说明断开键盘连接： ** 使用前请仔细阅读操作说明 ** * 若要断开键盘与设备的连接，请在设备中清除配对的信息，或直接关闭键盘电源。 OFF/ON 大写指示灯蓝牙指示灯电源指示灯充电接口电源开关电量指示： * A》单个通道蓝牙键盘连接操作： 1、开启电源，绿色指示灯点亮 1 秒（若指示为红色请及时充电）；按下配对键 Fn+C/ 1 秒蓝牙指示灯闪烁进入配对状态，有效时间约 120 秒；开启外部设备的蓝牙搜索功能，点击搜索到的“Wireless Keyboard”；配对成功后指示灯熄灭，即可使用键盘。若电源指示灯为红色慢闪，表示电池电量偏低，请及时进行充电，充电时红灯长亮；当指示灯为绿色时表示充电完成，请断开充电电源确保安全。功能键：当按键有多个字符或功能图标时，请按 Fn 或者 Fn+Shift 组合使用。注意：基于操作系统的开源性，不同品牌设备可能存在部分功能键与表格所示不一致或者无反应。不常规字符在 IOS 系统请配合 Option 使用，在 WIN/AND 系统请配合 Alt Gr 使用。 2、如果在 10 分钟内没有操作，键盘将进入
PAGE 5
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.