Instruction Manual

Reset switch
The motor adjusts a total of 5 gears, 100% of the
vibration of the first gear, 75% of the vibration of the
second gear, 50% of the vibration of the third gear,
25% of the vibration of the fourth gear, and 0% of the
vibration of the fifth gear.
The methods of operation are as follows:
1. Hold down the turbo key first and then hold down the
direction key up to strengthen the vibration of the
motor. If in 2 gears, press the key up to become 1 gear
,each shift, the motor should also vibrate for 1 second,
if adjusted to 2 gears, then the motor is 75% vibration
intensity vibration for 1 second.
Motor vibration intensity adjustment
（
Note: when you change to gear 1, you can't adjust it up
any more.
）
-5- V:0.1 june 26,2019