Instruction Manual

Channel LED:
If controller is paired,When the battery voltage is lower
than 3.5 V, connected channel LED(s) flashing warning
lower power, and close the vibration function.
The switch connection/pair Settings
：
1. On your Nintendo switch ,select the menu
item "Controller"------"Change Grip and
Order"
.
2. When the handle is off, hold down the Y button and
then hold down the home button. The channel lights
flicker and start pairing.
3.
When
channel LED
stay on
,connection
is successful .
4.
Enjoy your game on your devices.
SWITCH mode key layout:
1
2
3
4
Capture buttom
1. Default screenshot
btton on the switch
host.
2. Long press video
function on switch
host.
-8- V:0.1 june 26,2019
backlight is always on when the switch is
successful,Flicker when "turbo" function is
activated,Press the "R3+ Capture" button
again ,the key "Capture" can be switched
return to the "Capture" function key.
Note:Press the R3 key first and then the
capture key.
3. The "R3" button
and the "capture"
button can be
pressed once at
the same time to
switch "Capture" to
the "turbo" button
function,
Red annular