User's Manual

5
Figure 3-2. Pet treat tossing schematic diagram
The schematic diagram of pet treat tossing process is shown in Figure 3-2. Specifically, the
vertical FOV of camera lens is 70°. If the pet treat camera is placed in the height of 1-1.5m, it
would be able to eject pet treats to a distance about 1.2-1.5m, followed a curve trajectory
which briefly shown on Figure 3-2 (the red line). Meanwhile, the camera lens is designed
with a tilt angle of approximate 18°, this angle is demonstrated with a relative angle between
main optical axis and the horizontal line (the orange angle). Thus, this will ensure the pet
treats being thrown falling into the right middle of camera vision. Since pet treats will attract
pets, pet owner will conveniently be able to watch their pets with the best vision angle.
Feeding less amount, more times
Comparing with most pet feeders, the pet treat camera is capable of tossing much less
amount each time, which means one pack with a mere 100g pet snack could be divided into
about 30 triggers. Having more fun with less food, and also prevent pets from being
overweight.
Good sealing, Keep fresh
The top cover of storage space is made of food-grade silicon, also with good sealing design，
pet treats stored will remain fresh and delicious even the product is placed in high humidity
environment.