Instruction Manual

MADE IN CHINA
INSTRUCTIONS:
1. Wireless Charging Function:
• Once connected the LED indicator will
flash WHITE once indicating the deice
is in standby mode and is ready to begin
charging.
• As a modern 4x6" picture frame
• Place the wireless charging supported
* Note: When wireless charging, if the LED
indicator is flashing the device is either
NOT a wireless charging device or there is
an object between the device and charging
surface interfering with the charging process.
Phone Frame
with Wireless Charging
Instruction Manual
7141-84
1 x Phone Frame with Wireless Charging
1 x Charging Cable
1 x Instruction Manual
• Input power: 5V/1.5A
• Wireless Charging Output: 5V/1A
1. Phone Frame
2. Wireless Charging
What’s included:
Tech Specifications
Features:
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful
interference, and
(2) This device must accept any interference
received, including interference that may
cause undesired operation.
* Warning:
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authority
to operate the equipment.
FCC STATEMENT:
• WARNING-When using this product, basic
precautions should always be followed:
SAFETY PRECAUTIONS:
1. Read all the instructions before use.
2. Never store or use this product in
temperatures below 32°F (0°C) or above
115°F (45°C).
3. Do not overcharge your phone. The
unit may become hot under excessive
use. Remove your phone once it is fully
charged. Never charge your phone for
more than 7 hours at a time.
4. To reduce the risk of injury, close
supervision is required when the product is
used near children.
5. Do not expose the device to moisture.
6. Do not use the device in excess of its
output rating. Overload outputs above the
rating may result in a risk of fire or injury.
7. Do not use the device if damaged or modified.
8. Damaged or modified batteries may exhibit
unpredictable behaviour resulting in fire,
explosion or risk of injury.
9. Do not disassemble the device. For repairs,
seek a qualified service professional.
Incorrect reassembly may result in a risk of
fire or injury.
10. Do not expose the device to fire or
excessive temperatures. Exposure to fire
or temperatures above 104°F (40°C) may
result in explosion.
11. To ensure product safety, ensure that
qualified service professionals use only
identical replacement parts.
12. Attachments on the back of your phone can
impede the effectiveness of the wireless
charger, and lead to overheating. You must
remove attachments from the phone before
charging on this device.