Instruction Manual

Recycled ABS
MagClick
®
Fast Wireless
Charging Pad
Instruction Manual
7143-41
1 x Wirelsss Charging Pad
1 x USB to Type-C Cable
1 x Instruction Manual
Wireless Input Power: 5V/2A, 9V/1.5A
Wireless Output Power: 5W/7.5W/10W
Wireless Charging Mobile phones and
other electronic devices:
Insert the USB-C output of charging cable
(included) into the input port of wireless
charging pad and connect the USB output
included).
then turn off when the device is in wireless
charging standby..
WHITE once
Place the wireless charging supported
mobile device on the wireless charging
surface(1), LED will glow WHITE when
device is charging.
Phone will begin to charge automatically.
Once fully charged, remove your device
from the charging pad and disconnect the
charging cable.
Note: When wireless charging, be sure
there is no object between the device and
charging surface that would interfering with
the charging process.
MagClick® Wirelessly Charging Feature:
If your device supports MagSafe, the
magnets in your iPhone will connect to the
MagClick® wireless charging surface(1) of
the pad for a more secure charging.
This item is also compatible with other
items, the magnetic function just won’t
work.
1.
•
•
•
•
•
**
2.
•
•
1.
2.
3.
•
•
MagClick® Wireless Charging Surface
Type-C Input Port
LED Indicator
What’s included:
Functions:
Instructions:
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
This device may not cause harmful
interference, and
This device must accept any interference
received, including interference that may
cause undesired operation.
Warning:
approved by the party responsible for
compliance could void the user’s authority
to operate the equipment.
(1)
(2)
*
FCC Statement:
MADE IN CHINA
WARNING-When using this product, basic
precautions should always be followed:
Read all the instructions before use.
Do not overcharge your phone. The
unit may become hot under excessive
use. Remove your phone once it is fully
charged. Never charge your phone for
more than 7 hours at a time.
To reduce the risk of injury, close
supervision is required when the product is
used near children.
Do not expose the device to moisture.
Do not use the device in excess of its
output rating. Overload outputs above the
Do not use the device if damaged or
Do not disassemble the device. For
professional. Incorrect reassembly may
To ensure product safety, ensure that
identical replacement parts.
Attachments on the back of your phone
can impede the effectiveness of the
wireless charger and may lead to
overheating. You must remove attachments
from the phone beforehand.
•
1.
2.
3.
4.
5.
6.
7.
8.
9.
SAFETY PRECAUTIONS:
20mm