User's Guide

User Guide
Please read this User Guide carefully before you
use the product. This will let you know how to operate
the earphone.Please do not dismantle the earphone,
and please use the standard charging equipment to
avoid damaging the product.
Safty regulations
1. Please follow the safety rules mentioned in this
manual. Before using the Bluetooth earphones, we
strongly recommend to read it.
2. Please pay attention to the sharp edges, uneven
surfaces, metal parts and packaging.
3. Please do not dismantle and repair this earphone,
it may cause electron breakdown or even damage
the earphones completely, which are not within the
scope of warranty.
4. Do not wipe the product with oil and other volatile
liquids.
5. Please do not use this product in places where there
are potential risks for personal safety.
一，Power on:press the function button until you
hear the indicating voice “power on”, the
indicator light( Red and blue lights) flicker
alternately, now it is in pairing mode.Turn on
the bluetooth setting and then searching “S530”,
click it until the earphone and mobil phone pair
successfully.
二，Play music:turn on the music player to play
music, click the function botton it will pause,click
it again,it will play again.When there is a call
coming,the music will stop automaticly.
Product parameters：
Bluetooth mode 2.402- 2.480GHZ
Transmitted power
Support protocols：A2DP（a udio output：35 mW,p lay/pa use)
multi- point connection：can pair two devices
4
1
1
2
3
3
三,Answer the call: if there is a call coming, the
bell of earphone and mobil phone will ring at the
same time, click the earphone function button at
this moment, you can answer the call.Click the
function button again, to end the call.
四，Redial the last outgoing number:double click the
function button will redial the last outgoing number.
五,Language switching:the product can switch to
English or Chinese.Power on the product and
double click the function button before it enters
the pairing mode,(when hear a voice prompt:
Chinese mode/English mode)language switch
successfully.
六，Voice prompt: the product is with voice prompt
function,it is with English/Chinese voice prompt if
it is in English/Chinese mode.
七,Charging:mobile phone will show the quantity
of electric charge(some mobile phones can not
show it) . When it is battery low, there is a voice
prompt.Pls use the standard charge equipment to
charge it. When charging,the indicator light shows
red, it will turn blue when full charged
.
八，Accessories: An earphone,a manual,an USB
cable.
九，The product is just suitble for right ear.
Class 2
Effective wireless
range
10M
Input Power
AC110V~240V,DC5V
(Cha rgi ng time :2 h ours)
Talk time
1. 5 hour s( musi c play time :1. 5H,Sta ndby
time:6 0 hours，working curren t: 15mA)
Smart alert
voice prompt when it’s working
Wearing mode
in ear earphone/ invisible earphone
Battery
50mA rechargeable lithium battery
Size
28mm*16mm*15mm
Wight
around 6g
2
4
Function button
Indicator light
Microphone
Charging hole
FCC WARNING
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
Any changes or modifications not expressly approved
by the party responsible for compliance could void the
user's authority to operate the equipment.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to
radio or television reception,which can be
determined by turning the equipment off and on, the
user is encouraged to try to correct the interference
by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and
receiver.
-- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV
technician for help.
To maintain compliance with FCC’s RF Exposure
guidelines, This equipment should be installed and
operated with minimum distance between 20cm the
radiator your body: Use only the supplied antenna.
FCC ID:2ATRA-S530
FCC ID: 2ATRA-S530