Quick Setup Guide

ManualsBrandsDongGuan Mae Tay Electronic ManualsElectronicsWireless Keyboad

QUICK SETUP GUIDE

DX-PNC2019

Wireless Keyboard/Mouse Combo

MOUSE FEATURES

INSTALLING THE MOUSE BATTERIES AND REMOVING

THE NANO RECEIVER

1 Take the battery cover o.

2 Remove the nano receiver.

3 Insert the included AAA batteries into the battery compartment. Make

sure that the + and - signs match the symbols in the compartment.

4 Replace the battery cover.

Tip: Store the nano receiver in the mouse when it is not in use.

KEYBOARD FEATURES

PACKAGE CONTENTS

• Wireless keyboard

• Wireless mouse

• Nano receiver

SYSTEM REQUIREMENTS

• Windows® 10, Windows® 8.1, Windows® 8, Mac OS 10.X or higher,

or Chrome OS

• One available USB port

Before using your new product, please read these instructions to prevent any damage.

• AA battery (1)

• AAA batteries (2)

• Quick Setup Guide

FUNCTION

Power ON

Low battery warning

DESCRIPTION

Red LED is on for 10 seconds, then turns o.

Red LED blinks for 10 seconds.

OFF/ON switch

Battery cover

USB transceiver

Pull

Final ﬂat size: 16.5 × 5.83 in. (419.1 × 148.08 mm)

Final fold size: 4.125 × 5.83 in. (104.775 × 148.08 mm)

DPI switch

Left button

Scrolling wheel

Right button

AAA batteries

INSTALLING THE KEYBOARD BATTERY

1 Take the battery cover o.

2 Insert one AA battery (included) into the battery compartment.

Make sure that the + and - signs match the symbols in the

compartment.

3 Replace the cover.

LED INDICATORS

LED indicator

[REVIEWERS: Please verify that there is NO LED indicator on the mouse.

If there is one, where is it located?]

Maetay：Yes，No LED indicator

Summary of content (2 pages)

PAGE 1
MOUSE FEATURES Left button Scrolling wheel DX-PNC2019 3 Insert the included AAA batteries into the battery compartment. Make sure that the + and - signs match the symbols in the compartment. Right button OFF/ON switch DPI switch INSTALLING THE KEYBOARD BATTERY 1 Take the battery cover off. 2 Insert one AA battery (included) into the battery compartment. Make sure that the + and - signs match the symbols in the compartment. 3 Replace the cover.
PAGE 2
CONNECTING YOUR MOUSE AND KEYBOARD TO YOUR COMPUTER 1 Plug the nano receiver into the USB port on your computer. 2 Slide the ON/OFF switch on your mouse to ON. The computer automatically detects the mouse and keyboard and you can immediately begin using them. If the mouse or keyboard does not work: • Re-plug the nano receiver into the USB port on your computer. The LED indicator on the keyboard flashes steadily while in pairing mode (10 seconds). After pairing successfully, the LED turns off.