User's Manual

4
Step 1: Turn off power at the circuit breaker that controls the
light switch. Use voltage tester to confirm no voltage
is present.
Step 2: Remove existing faceplate and light switch, then
identify Live/Load, Neutral and Ground lines.
Step 3: Connect the Smart Switch wiring with the provided wire
connectors as follows:
 Black wire on switch (Live Line)  Live Line
 White wire on switch (Neutral Line)  Neutral line
 Green wire on switch (Ground Line)  Ground line
If use it as a Single Pole:
 Red wire on switch (Load Line)  Load line to light bulbs
 Capped the Brown wire
If use it for 3-way:
 Red wire on switch  Travelers to slave switch & Brown
Please wrap electrical tape around the wire nuts to make sure
the copper conductor is fully concealed.