User Manual

ManualsBrandsDongguan Meiluodi Electronics ManualsAudio EquipmentBluetooth speaker

For Warranty Information and the most

up-to-date version of this User’s Guide,

go to:

WARRANTY

To download this User’s Guide in English, Spanish, or French, or to get answers to

frequently asked questions, visit the support section at:

www.meiluodi.com

Para descargar este Manual del Usuario en inglés, español y francés, o para obtener

respuestas a preguntas frecuentes, visite la sección de apoyo en:

Pour télécharger ce guide de l’utilisateur en anglais, espagnol ou français, ou pour

obtenir des réponses à des questions fréquemment posées, consultez la rubrique

d’assistance sur:

INTERNATIONAL SUPPORT

PAIRING A BLUETOOTH DEVICE

1. Press and hold the Power button to power on the speaker.

2. Press and hold the Pair button to begin pairing.

The Pairing Indicator will begin ashing quickly. When pairing, remain within 3 feet

of the unit.

3. Using the controls on your Bluetooth device, scan for and select ISBW105 in

your Bluetooth settings to pair. If your device requests a password, enter the

default password 0 0 0 0 .

Refer to the user’s manual for your specic device for instructions on pairing and

connecting Bluetooth devices.

4. When successfully paired, the Pairing Indicator will turn solid and an audible

chime will sound through the speaker.

After initial pairing, the unit will stay paired unless unpaired manually by the user or

erased due to a reset of the device. If your device should become unpaired or you nd

it is unable to connect, repeat the above steps.

PLAYING AUDIO WIRELESSLY

1. Use the controls on the connected device to select an audio track.

2. Audio played through the connected Bluetooth device will now be heard

through the speaker. Use controls on your device or the speaker to play, pause,

skip, and change the volume.

Bluetooth Speaker

User’s Guide for Model No. ISBW105

USING THE SPEAKERPHONE

1. When a call is received, a ringtone will sound through the speaker. Press the

Play/Pause/Speakerphone button to accept the call or accept the call using the

controls on the connected phone.

2. The incoming call received through the device will now be heard through the

speaker. Speak into the microphone on the top of the speaker during the call.

3. To end the call, press the Play/Pause/Speakerphone button or end the call

using the controls on the connected phone.

CHARGING THE BATTERY

Requires a Micro-USB to USB cable (included).

Note: Be sure the computer is not in sleep mode.

1. Using a Micro-USB to USB cable (included), connect the larger USB plug to the

USB port of a powered on computer or USB power adaptor.

2. Pull back the water cap and connect the smaller Micro-USB plug to the Micro-

USB port of the unit. The unit will now charge.

WARNING: DO NOT, UNDER ANY

CIRCUMSTANCES, CHARGE THE SPEAKER

WHILE IT IS IN OR NEAR WATER. ALLOW

AMPLE TIME TO DRY BEFORE CHARGING

AFTER USE IN WATER.

FCC ID:2ABQOAMK-S3-02B

www.meiluodi.com

Summary of content (3 pages)

PAGE 1
WARRANTY For Warranty Information and the most up-to-date version of this User’s Guide, go to: www.meiluodi.com INTERNATIONAL SUPPORT CHARGING THE BATTERY PAIRING A BLUETOOTH DEVICE PLAYING AUDIO WIRELESSLY To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at: www.meiluodi.com Requires a Micro-USB to USB cable (included). Note: Be sure the computer is not in sleep mode. 1.
PAGE 2
• WARNING: Do not place this unit directly onto furniture surfaces with any type of soft, porous, or sensitive finish. As with any rubber compound made with oils, the feet could cause marks or staining where the feet reside. We recommend using a protective barrier such as a cloth or a piece of glass between the unit and the surface to reduce the risk of damage and/or staining.
PAGE 3
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.