User's Manual

clock，Click the save icon in the upper right corner to exit，as show below：
(set up the main interface) (alarm clock set)
Ⅲ、 Assembly Description：
1．Insert the stainless steel pipe into the base, press a M3 screw nut into the nut slot, and then establish
them with a PM3.0*25mm screw:
2.Insert the transmitter holder into the stainless steel pipe, establish them with a PM3.0*22mm screw
and a M3 screw nut:
3．Insert the rain gauge holder onto the short side of the transmitter holder, establish them via a