2.4 GHz Wireless Optical Nano Mouse User Manual PID#:111383/384/385/386/603-109289 PID #: 111625/626/627/628-109289 Rev.
All brand name and trademarks are the property of their respective companies Mac and Mac OS X are registered trademarks of Apple Inc. Windows, Windows XP, Windows Vista, Windows 7 and Windows 8 are registered trademarks of Microsoft Corporation in the United States and/or other countries. USER RECORD To provide quality customer service and technical support, it is suggested that you keep the following information as well as your store receipt and this user manual.
CAUTION The Federal Communications Commission warns the user that changes or modifications to the unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
PACKAGE CONTENTS Your new mouse will ship with the following items: - 2.4GHz Wireless Optical Nano Mouse - Nano Receiver - 2 AAA Batteries - User Manual - Warranty Information SYSTEM REQUIREMENTS Please be sure that you meet all of the system requirements below to avoid difficulties during installation Compatible with: PCs, Mac® computers, and Chromebook™ notebook computers Works with: - Windows® XP, Windows® Vista ,Windows® 7 and Windows® 8 operating systems - Mac OS X® 10.
INSTALLING BATTERIES To properly install batteries into your mouse, please follow the instructions below: 1. Remove the battery compartment cover from your mouse. 2. Install two AAA batteries into the battery compartment following the orientation guide in the battery bay. 3. Replace the battery compartment cover back onto your mouse until it locks securely.
INSTALLATION For All Operating Systems 1. Make sure you have successfully installed the batteries into your mouse. Refer to the Installing Batteries section in this manual if necessary. 2. Pull out the Nano Receiver stowed in the bottom of your mouse. 3. Turn on your computer and plug the Nano Receiver into an available USB port on your computer. (If you are not able to find a USB port on your computer, please refer to the user manual of your computer for more detail.
DOWNLOADING TILT-WHEEL SETUP SOFTWARE In order for the tilt-wheel function to work on your mouse you MUST download the setup software from the Gear Head website. 1. Go to the Support page (http://pcgearhead.com/support.php) on the Gear Head website and click the DOWNLOAD: DRIVERS, MANUALS, OR SOFTWARE button. 2. Find Desktop Mice and click Select Category.
3. Find Model MPT3000/ MPT4000 and click get downloads…. (NOTE: Please check the FCC ID number on the rating label which is located under the mouse. Then follow FCC ID number to download relevant software.
4. A pop-up window will appear to initiate the download; click Download to start downloading. 5. Follow the onscreen instructions to download the setup software. INSTALLING THE SETUP SOFTWARE 1. Decompress the downloaded software and click the Set Up icon to begin installation. 2. The USB Optical Mouse - InstallShield Wizard will appear on the desktop. Choose your installation language on the following screen and click Next to continue. 3.
USING THE SOFTWARE Button Assignment Advanced Functions You can assign a function to any button of your mouse by selecting from the functions stored in the drop-down menu of each button. These are the 12 options: - Click - Menu, - Universal Scrolling, - Double-click - Advanced Functions (see right for details) - Button 4 - Button 5 - Switch Profile - Cycle of Switch Profile - Pan Left 10 Single/Macro You can assign any key function or key combination to a single button on your mouse.
- Pan Right - Button Off Switch Profile You can set the functions of your mouse buttons to go to a specified mouse configuration profile, every time that mouse button is clicked. Cycle of Switch Profile You can rotate between the 5 profiles you have set by clicking the assigned mouse button. The 5 configurations can be set and stored using the software.
CHANGING THE SPEED OF YOUR MOUSE To adjust the speed of the cursor or the scroll button features on your computer, follow the instructions below: NOTE: The screenshots show in this section are for demonstration only and your screen may look slightly different but with similar options. For Windows® Operating Systems Open the Control Panel. Double-click the Mouse icon to open the Mouse Properties screen and then select Pointer Options. Adjust the settings to your liking and select Apply then OK.
WARRANTY INFORMATION Gear Head, LLC warrants that this product shall be free from defects in materials and workmanship for the reasonable lifetime of the product. If the product is defective, Gear Head, LLC’s sole obligation under this warranty shall be at its election, subject to the terms of this warranty, to repair or replace any parts deemed defective. This warranty is for the exclusive benefit of the original purchaser and is not assignable or transferable.