User Manual

◆ Method to acquire the serial number:
Acquire from the packing case or the SN registration card (please take care of the serial number after acquisition).
2.3 Principle of Operation
◆ Robstep M2 mainly comprises the transporter body, wheels and a circuit system.Wheels are installed on both sides of
the transporter body, and modules of the circuit system such as the power supply, a control circuit, a driving circuit,
sensors and a control switch are installed in the transporter body.The wheels and the transporter body are connected
by a rotary shaft, and a speed sensor, a gyroscope and an acceleration sensor transfer the rotary speed of wheels and
the posture information of the transporter body to the control circuit, for controlling the torque and the moving speed
of a motor to keep the balance of Robstep (Robstep M2 and the user). When the user stands on Robstep M2 correctly,
Robstep M2 can match well with their body, and a power device controls the wheels to move forward or backward to
keep balance when the body slightly inclines forward or backward.
◆ The handle has the function of controlling the transporter body to turn. When the handle turns, the transporter body
turns.
◆ The inertial dynamic balancing and stabilization system built in Robstep M2 can keep the balance of the
transporter body from front to back.However, the system cannot control the stable balance from left to right, so when the
driver turns, their center of gravity must incline toward the steering rod, to overcome the centrifugal force of steering and
WARNING
!
3.Remote control
3.1 Remote Control Type 1
◆ This type of remote control is a rechargeable device with information display and control functions and a maximum
remote-control distance of 10 m, within which Robstep M2 can be controlled remotely in operation, and its working
status can be monitored.
3