DK-9081RL User Manual VER: 0.1 USER MANUAL Model Name : 2.4G WIR E L E S S K E Y B OAR D MOD E L NO. : D K -9081R L V E R S ION : 0.1 D AT E : 2010.5.
DK-9081RL User Manual VER: 0.1 Version. # Revised Date PIC Remark 0.
DK-9081RL User Manual VER: 0.1 Electrical Specification 1. Operating Voltage Keyboard supply voltage: 1.8V-3V (2 AAA batteries) 2. Current Consumption Current use :< 10mA 3. Sleeping Mode 3.1 Timing to sleep mode: 10S (The time from all keys are free to the keyboard turn to sleeping mode) 3.2 Current during the sleeping mode :< 0.05mA (finally stable the current) 3.3 Wake up: press any key of the keyboard 4. Low-voltage indicate When the voltage below 2.
DK-9081RL User Manual VER: 0.1 Key Function Chart 1. Standard part can be composited of 104/105/106/107/109 2.
DK-9081RL User Manual VER: 0.1 Operation Process Step 1 Open the battery cover which in the back of the keyboard. Insert 2 AAA battery which is environment-friendly and safety Close the battery cover. Step 2 Place the keyboard on a desk or other plane surface. The surface material isn’t metal is better for wireless distance. Step 3 Insert a Transceiver in a USB port of PC. The Receiver is pairing with the keyboard. Step 4 Use the keyboard freely.
DK-9081RL User Manual VER: 0.1 Keep dry. Humidity, liquids, contain minerals that will corrode electronic circuits. Don’t use or store in dusty, dirty areas. Don’t store in hot areas. High temperature can shorten the life of electronic devices and warp or melt certain plastics. Don’t store in very cold areas. Moisture can form inside the case, which may damage electronic circuit boards. Don’t attempt to open the case. Non-expert handling of the device may damage the system.
DK-9081RL User Manual VER: 0.1 This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may communications. cause harmful However, there interference is no to radio guarantee that interference will not occur in a particular installation.
DK-9081RL User Manual VER: 0.1 1) This device may not cause interference and 2) This device must accept any interference, including interference that may cause undesired operation of the device. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment 1.This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2.