User's Manual

ManualsBrandsDongguan Siyoto Electronics ManualsAudio EquipmentBluetooth headset

 Introduction

The Bluetooth headset Bone SMBT-4055 is a portable hand free communication device with

A2DP profile built on Bluetooth wireless technology. This headset is designed and manufactured

in accordance with Bluetooth specification VR4.0 which supports adaptive frequency hopping

and allows faster connection, the noise immunity within the wireless area network is better than

the BT V2.1 Headset

Product standard

Bluetooth version：V4.0

Talk tine:：up to 18 hours

Standby time：up to 200 hours

Battery standard：Rechargeable lithium polymer battery

Power adapter output: DC5V 150mA

Charging the headset

Your headset uses a rechargeable battery,you must charge

The battery fully before using the headset for the first time.

1. Plugging the charging cable in the USB charge port

2. The rde indicator lamp remains solid when charging.

3. The fully charging takes2-3 hours

4. The red indicator lamp goes out and the blue indicator

remains solid when charging completed

Volume

Volume +

BACK

NXET

Buttun/Play

Print to PDF without this message by purchasing novaPDF (http://www.novapdf.com/)

Summary of content (4 pages)

PAGE 1
 Introduction The Bluetooth headset Bone SMBT-4055 is a portable hand free communication device with A2DP profile built on Bluetooth wireless technology. This headset is designed and manufactured in accordance with Bluetooth specification VR4.0 which supports adaptive frequency hopping and allows faster connection, the noise immunity within the wireless area network is better than the BT V2.1 Headset BACK Volume - Volume + Buttun/Play NXET Product standard Bluetooth version：V4.
PAGE 2
Power on/off the headset a. To power on: press and hold multifunction button for about 3 seconds until blue light flashes. b. To power off: when headset is power on,press and hold multifun ction button for about 6 seconds indicator light goes off Voice Prompt a. When the headset is on, there will be the automatic voice prompt: power on b. When the headser is off, there will be the automatic voice prompt: power off c. When being connected successfully, there will be voice telling: connected d.
PAGE 3
2. Connect to 2 devices at the same time a. Press multifunction button for 6 seconds the headset into pair status. Blinking in blue and red alternatively b. Set the phone to search for Bluetooth device. c. When phone finds headset confirm by selecting”SMBT-4055” from list.. d. Enter pin code “0000” when prompted by phone. e. Repeat steps B-E if the pairing was unsuccessful f. If pairing was successful,starts to flash blue .
PAGE 4
Volume control Volume keys to adjust the volume: Press the plus button to increase the sound, press the down key growth small 4 Print to PDF without this message by purchasing novaPDF (http://www.novapdf.