User's Manual

2
Power on/off the headset
a. To power on: press and hold multifunction button for
about 3 seconds until blue light flashes.
b. To power off: when headset is power on,press and hold
multifun ction button for about 6 seconds indicator light
goes off
Voice Prompt
a. When the headset is on, there will be the automatic voice
prompt: power on
b. When the headser is off, there will be the automatic voice
prompt: power off
c. When being connected successfully, there will be voice
telling: connected
d. When the battery is low,there will be voice
telling: low battery
Voice Telling
When a call comes in, the headset will speak up the caller′
sphone number.
Pair to your Bluetooth phone
1.Pair the Bluetooth headset for the first time
a. The distance between the Bluetooth headset and your
Bluetooth phone would be better within 1 meter when
pairing,the closer the better.
b. Press multifunction button for 6 seconds,the headset into
pair statuw. blinking in blue and red alternatively
c. Set the phone to search for Bluetooth device.
d. When phone finds headset, confirm by selecting
“SMBT-4055” from list.
e. Enter pin code “0000” when prompted by phone.
f. Repeat steps B-E if the pairing was unsuccessful.
g. If pairing was successful,starts to flash blue.
Print to PDF without this message by purchasing novaPDF (http://www.novapdf.com/)