User's Manual

ManualsBrandsDongguan Taide Industrial ManualsAudio EquipmentBLUETOOTH SPEAKER

User Manual

Please read this user manual before using.

Chapter I Features

▊Plug & Play features

Supports SD cards, USB storage devices and music devices (maximum 32G storage) compatible with

most MP3/WMA music files.

▊Support Bluetooth device

Support Bluetooth Version 2.0+EDR (A2DP=Advanced Audio Distribution Profile)

▊All-purpose interface

Compatible to PC and digital devices with 3.5mm audio interfaces

▊High-sensitivity, All-band, Professional FM stereo radio

Embedded high-sensitivity circular antenna.

▊Perfect presentation, High-class sound effect

2 inches full range speaker, realizing pass-through treble, magnetic mediant and powerful bass.

▊LCD display

65*40mm LCD display; easy to operate.

Chapter II Package Accessories

▊Package Included

l BT034 Digital Multimedia Speaker: 1 ×Set

l BT034 User Manual: 1 × Piece

l 3.5mm Stereo Audio (Antenna Cable: 1 × Piece)

l USB Power Line: 1 × Piece

l BL-5C rechargeable Battery:1050mAh

l Remote Controller :1 × Piece

Chapter III Technical Parameters

Category Item Description

Applicable memory

cards

SD card

Max capacity of

memory card

Applicable to memory card with capacity not exceed 32GB

Audio play

Audio format Music in format of MP3/WMA in all kinds of usual bit rate

Type LCD display

Size 65*40mm

Screen

Color White on Blue, white LED backlight

Frequency Range 87MHz-108MHz

Channel No. 30

Receiving Antenna Plug in 3.5MM stereo audio cable as external antenna

FM Radio

Searching Type Auto/Semi-auto

Audio

Sound Track 2.0

Summary of content (6 pages)

PAGE 1
User Manual Please read this user manual before using. Chapter I Features ▊Plug & Play features Supports SD cards, USB storage devices and music devices (maximum 32G storage) compatible with most MP3/WMA music files. ▊Support Bluetooth device Support Bluetooth Version 2.0+EDR (A2DP=Advanced Audio Distribution Profile) ▊All-purpose interface Compatible to PC and digital devices with 3.5mm audio interfaces ▊High-sensitivity, All-band, Professional FM stereo radio Embedded high-sensitivity circular antenna.
PAGE 2
System External Interface Bluetooth technical Specification Chapter IV Speaker System Full-range speaker, magnetic shield Speaker Unit 2 inches *2 Power 3W*2 Frequency Response 100~20KHz Sensitivity 600mv Impedance 4 ohms Audio Enhancement SRS WOW and Microsoft sound effect AUX Audio Input 3.5MM standard interface DC-IN Power Input Standard 3.5mm DC Input Interface Card Type SD card, USB Memory Device Bluetooth Version 2.
PAGE 3
7. : VOL-/Previous 8. SET: Setup key 9. SLEEP: Power Timer 10. Power key 11. LCD display 12. Speaker 13. Speaker 14. SD card slot 15. USB interface 16. Power interface 17. Audio input 18. FM antenna outlet 19. Battery case 【Tip: Remote controller has above 1,2,6,7, 10’s function】 Chapter V Operation Instructions ▊Introductions of Key Functions : Power Key Power key of speaker is in default “OFF” status. To switch on the speaker, you can plug the USB power supply and then press “ ”.
PAGE 4
key to adjust the number and press SET again and , key to adjust accordingly. Use the same method to adjust the Date, Hour, and Minute, and press any key to exit or the system will exit automatically. Time Inquiry: In any status other than time display, users can press SET to check the time. SLEEP: Power Timer: The time can be set as OFF, 15, 30, 45, 60, 75, 90, or 120 minutes. Default status is OFF status. ▊Music play 1.
PAGE 5
Chapter VII Troubleshooting Failure Not working, LCD does not light SD card/USB disk FM radio receives few/no radio channel AUX no sound Bluetooth can’t successfully after connection be matched several times’ Solutions (1) Check whether the rechargeable battery is properly installed (2) Check whether power line is correctly connected, or (3) Whether the power supply is turned on or backlight is turned off (1) Check whether the device is in music play mode (2) Check whether SD card/ USB disk is proper
PAGE 6
FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.