Network surveillance camera 4.
1. Instruction ----------------------------------------------1 2. Precautions before use------------------------------3 3. Packages Contents-----------------------------------4 4. Product Structure ------------------------------------ 5 5. Product Specifications-------------------------------6 6. First steps :Preparation before use-------------8 6.1 Installing the app---------------------------------8 6.2 Prepare the battery and install the memory card -------------------------------------9 7.
Instruction This full HD1080P high-definition hidden alarm clock camera has a powerful night vision function and a 160° wide-angle fisheye lens. The night vision function automatically switches between night and day, and the effective night vision distance is greater than 33ft.
eccam eccam.
Alarm clock camera
H8 160
POTPlayer Supports 2.
Download the eccam from APP Store or Google Play. The eccam App connects your camera to your Android or iOS mobile device ensuring you are always connected to what matters most. To get the App, search for "eccam" in the Google Play or App Store and download it. You can also use your mobile to scan the QR-Code to download the "eccam" App.
blue light Red & blue light.
Alarm clock connection settings
enter “hour", "minute" and "seconds" respectively After adjusting them, you need to long press the setting icon till the display screen from flashing to steady on hour
untill the display screen is not flashing, or the alarm setting will not be saved. The display screen flashes"Lo",which means low battery. Please plug it in for use.
1.Press the “R” button on the back of the camera. 2.After about 10 seconds,the blue light begin to flash. 3.About 5 seconds later, You will hear two "DI DI" in a row. It is ready to connect. 4.Open the "eccam" App,it will need you to “allow eccam to send you notifications.
5.
6.Please Click ”Allow while using app” and “next” to access to the next step. 7.Continue to click”Next” and then it will go access to setting menu.
8.Open the "WLAN" menu, find the camera of the IPC_PPCS - ***********, and click on the connection, Maybe it will prompt "Unable to join thr network" . plese click "OK" and try to connect again. When the connection is successful, click on the upper left corner button "eccam" to return to the APP interface.
9.Go back to eccam APP and enter your home WIFI and password and then Config.
10.Bind it successfully.Then you should already see a screen with the view of the camera. Note: The old password is: admin. Default password is insecurity,you had better modify it.You can edit your new password in “security code”. You can give the camera a name. If you see no picture or a black image (instead of the view of the camera), or you have no service, click then directly on the picture to load the image. Do not use VPN software while using the eccam App There is a possibility that the camera.
9. Using the camera with the eccam app All instructions and guidelines mentioned in this chapter are based on the eccam App version 1.0.3. Only commonly used features are explained to be able to use the camera. This is not an eccam App user manual.
You can share this camera with other people. Click on the setting icon and then you will see a QR code. Others can scan it to share this camera.
The steps that your family share your device.
The sharing of the device with a new user was successfully after receiving the following picture. Note: The sharer needs to modify the security code the same with yours. If you want to use another mobile phone to connect to this camera, press the “R” (RESET) button first. After the reset, you can connect the new mobile phone device directly.
9.1.2. Basic camera setup & settings You can do a simple basic camera setup or access all the settings by clicking on the icon. You can enable recording of the camera,alarm setting and night vision setting.
You can modify its name and delete the camera (= unbind the device from your account) by clicking on the icon. You had better modify the password of the camera. The default password is admin. Any way,if you forget the password after you change it,you can reset the camera firstly and connect it once again.
9.2.The live view screen of the camera Click on the picture of your camera in the eccam Home menu to enter the live view The live view screen will be your device's menu. Most of the important features you can find here.
at first,please send an email to us.
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.