Specifications

5
LavaLock® ATC-3 Features
- Smart PID full-cycle control algorithm for accurate and stable Pit temperature
control.
- Conntects to your WIFI enabled phone for direct access to temperatures and all
the control settings.
- Quick and easy operation on the controller itself. Advanced setup and cook data
shown on phone application.
- Controls your pit temperature and monitors all four probes’ statues.
- Pit and meat probes are made of armored, dishwasher-safe materials.
- Real-time pit, meat and fan statuses.
- Features temperature alarms, low fuel, fire & open lid detection.
1. Controller operating specification
1.1 Plug the power supply into the controller and turn the power button on.
1.2 Default temperature scale is °F. Go to App Settings to change temperature scale.
1.3 When the probe is inserted, the corresponding led would light up.
1.4 Press and hold the（-/+）button for 1 second to switch probe temp shown on the
screen.
1.5 Please and hold select button for 2 seconds to enter target temperature set mode.
1.5.1 Both the number on the screen and the corresponding led light would flash
while in set mode.
1.5.2 Press（-/+）to set the target temperature.
1.5.3 Default temperature for Pit, Meat 1, Meat 2 and Meat 3 is 250°F.
1.6 When Pit target temperature is set, fan would start running with variable speed to
get to the target temperature.
1.7 When Meat target temperature is set, both controller and app would alert when
meat temperature reaches the target temperature.
2. Application operating specification
2.1 The ATC-3 controller supports both WIFI 2.4G & WIFI 5G.
2.2 Download Tuya Smart Application from app store.
2.3 For new users, please follow Tuya Smart instruction and enable WIFI on your
phone for controller WIFI setup.
2.3.1 Turn on the ATC-3 controller.