Specifications

8
Note: The 35 cfm is standard fan for the ATC-3 controller. The controller could run a
much larger fan with XX cfm to support large sized pits. For large sized pits solutions,
please contact [e-mail] or visit xxx for product recommendation.
FAN Adaptor Kit
1 Main threaded adapter can fit almost any cooker. Drill a hole near the original intake
damper on the cooker and secure with the supplied nut. You could also install the fan
adapter directly onto some intake dampers, if it does not affect function of the damper.
Note: Main threaded adapter housing features a positive shut off for times when you
do not want to use your controller. DO NOT USE CONTROLLER when the positive
shut off on the adapter is engaged.
2 Conversion plates are designed for quick installation on some popular smoker
models. See website or full instruction manual for installation and use of conversion
plates. The included adapter plates can be trimmed to fit.
Power Supply
The power supply should only be connected to a 110 GFCI protected outlet. It is
suitable for outdoor use. Do not submerge power supply or controller in water or use
in wet locations.
Quick Start Notes and Precautions
1 Do not operate controller or BBQ indoors. Do not operate near structures.
2 Do not operate BBQ on uneven surface.
3 Do not operate BBQ near combustibles.
4 Do not use when unattended.
5 Intended for use by adults only under normal operating conditions.
6 Never operate a BBQ or controller when damaged or in disrepair.
7 Use common safety precautions while in use and storage.
8 Please see full product manual for additional information.