User's Manual

Do not immerse in water or expose to
moisture or damp weather conditions.
Do not drop, knock, or shake. Rough handling
can damage the internal precision component
and its boards.
Do not insert any objects into the speaker/
mic.
Keep away from children. Device is not a toy.
Keep away from fire or other sources of heat.
Exposure to high temperatures may cause
it to explode.
Do not short-circuit as this may cause damage
to the unit.
Do not pull the charging cable or over-extend
it’s reach.
Unauthorized changes or modifications may
void your right to use this product.
While using, always comply with any special
regulations that may apply to the area you
are in and always turn off your mobile device
when its use is prohibited.
5.
6.
7.
8.
9.
10.
11.
12.
13.
Clip Mini Bluetooth
®
Speaker
Instruction Manual
XO-9401
1 x Mini Speaker
1 x USB to Micro-USB charging cable
1 x Carrying Strap
1 x Instruction Manual
Input: DC 5V/500mA
Product Dimensions: 35*35 *35 mm
Paring name : mini SPEAKER
Bluetooth version: 4.2
output power: 5.5dBm
Frequency response:2.4-2.48G
Battery type: Li-Polymer
Battery Capacity:200MAH
Using your computer. Connect a USB cable
to a USB outlet on your computer. Using the
Micro-USB connector, connect the other end
of the USB cable to an charging port on the
speaker. Make sure the computer is on to
begin charging the speaker.
Connecting a Media Device:
Press and hold the Power Button for approx. 2
seconds to turn speaker ON/OFF.
The Blue LED Indicator will flash to indicate
pairing mode.
Select “Mini Speaker” on your media device.
Power Button Function:
Audio volume and track selection can be
made by using the media source device.
Single, short press the power button to play/
pause audio.
When receiving an incoming call:
Single, short press the power button to answer
an incoming call.
Single press again to hang up.
Use the mic located on the speaker base
during a call.
Charging the speaker:
Using a regulated USB adapter. Connect
a USB cable to a USB adapter. Using the
Micro-USB connector, connect the other end
of the USB cable to the charging port on the
speaker. Plug the USB adapter into the outlet
to begin charging.
WARNING–When using this product, basic
precautions should always be followed,
including the following:
Read all the instructions before using the
product.
Charge the speaker completely before initial
use to ensure longevity.
If the device does not respond once it is
powered on, the battery capacity may be low.
Do not over charge the internal battery.
b.
2.
a.
b.
c.
3.
a
b.
4.
a.
b.
c.
1.
a
•
1.
2.
3.
4.
•
•
•
•
•
•
•
•
•
•
•
•
Power Button
Micro-USB Charging Port
LED Indicator
Mic (speaker base)
What’s included:
Tech Specifications
Instructions:
Instructions (continued):
SAFETY PRECAUTIONS:
SAFETY PRECAUTIONS (continued):
MADE IN CHINA
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions:
This device may not cause harmful
interference, and
This device must accept any interference
received, including interference that may
cause undesired operation.
Warning:
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authority to
operate the equipment.
•
(1)
(2)
*
FCC Statement:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment . The device has been
evaluated to meet general RF exposure
requirement.