User's Manual

145x160mm
1
2
3
5
6
7
1.Next/Volume up
2.On/O
3.Previous/Volume down
4.Indicator Light
5.Charging
6.Aux in
7.Mic
WIRELESS HEADPHONE BT-6056 USER MANUAL
1. WIRELESS Headphone
2. USB Charging Cable
Long press to turn on / o
Short press to play / pause when music playing or answer / reject the phone call
Pleas make sure the product is fully charged for the rst use. Charge the product with the provided USB cable which is
compatible with any computer or other 5V output charger. The charge Bluetooth Indicator will be in red while charging,
then when the battery is fully charged it will turn o.
1. Charging time: about 2 hours.
2. When using for the rst time, charging for more than 1-2 hours is good for battery.
3. Please charge the product if the priduct hasn’t been used for a long time (more than one month)
4. Please keep away from re and water.
5. To prevent possible hearing damage, do not listen at hign volume levels for long periods. Don not use the
headset while driving or cycling or in an situation where you should be able to hear other sounds. As a guide to
setting the volume level, check that you can still hear your own voice, when speaking normally while listening with
the headset.
Support A2DP,AVRCP,HSP,and HFP pro
le Headset Spec:
1. Driver Unit: 40mm;
2. Impedance:16 ohms;
3. Sensitivity: 103dB +/- 3dB;
4. Max. Input Power: 20mW;
5. Frequecny Response: 20Hz-20kHz;
Features:
1. Working distance : 10 M
2. Built-in rechargable Battery: 3.7V,200mAh
3. Playing time: up to 8 hours
4. Phone talk: up to 8 hours
5. Charging Time: 2.0~2.5hours
6. Stand-by time : up to 15days
Step 1: Open the Bluetootn setting on your phone or tablet and click “search device” . iphone’s will search for Bluetooth
devices autonmatically.
Step 2 : You have found the product when the screen displays the character “wireless headphone” , Click on it in your device
to pair the connection.
Step 3 : The phone or tablet will indicate when the pairing is successful. The character on the display of the product will
stop ickering.
Short press + to play the next song. Long press + to volume up.
Short press - to play the previous song. Long press - volume down.
Please read the instructions before use the headset.
THE OBJECTS IN THE BOX
BUTTON ICON:
1. Power Switch:
4. CHARGING:
5. Product Specications:
TIPS:
2. WIRELESS Music mode:
3. MOBILE PHONE CONNECTION:
WIRELESS HEADPHONE
WIRELESS HEADPHONE:
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and;(2) this device must accept any interference received, including interference that may cause undesired operation. Any
Changes expressly or modications not approved by the party responsible for compliance could void the user's authority to
operate the equipment.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .
This transmitter must not be co‐located or operating in conjunction with any other antenna or transmitter.
4