User's Manual

6
Basic Connections
Charging the Battery
The device has a built-in rechargeable battery. Charge the device when the battery
level is low.
To charge the battery, connect the device to a power adaptor via the USB port. It
takes a few hours to fully charge the battery.
Note:
a. You are prompted to charge the battery when the device warns that the battery is lower than 15%!
b. In the event that the device shuts down automatically because of battery exhaustion, charge the battery
for at least 5 minutes before you turn on the device.
Turning On/ Off the Tablet
To turn on the device, press and hold the Power button on the unit until you see the
boot-up screen. It may take about one minutes to start up the system.
To turn off the device, press and hold the Power button until you see the option
“Power Off”, tap on “Power Off” and then tap on “OK”.
Tip: The device may fall asleep with the screen display locked when there is no touch action for a while.
You can briefly press the Power button to wake it up.
Installing the Memory Card (TF card)/SIM Card
This device can read files directly from a memory card (TF card/Micro SD card).
Also, you can install a SIM card into the slot on the back cover of the device for the
purpose of communication or accessing the Internet.
To install a memory card or SIM card, find the card slot on the back cover of device
and then insert the card into the slot in the correct orientation.
To access the files stored in the memory card, enter the file manager mode by tapping
the File Manager icon and select the “External SD” directory.
Note:
a. Whenever you install a card, pay close attention to the oriention of inserting the card.
b. To guarantee the normal function of a SIM card, you should turn off the device every time before you
SIM CardTF Card