User's Manual
Speaker User Manual
Introduction:
Please take a few moments to read through the following user manual before using this Speaker:
①Power on/off ②Charging port
③LED ④⑤Speaker
Wired Operations:
1. Turn the Power ON/OFF button to active the speaker. A blue light will appear
2. Connect the speaker to your computer or other audio devices as below drawings (mini USB plug into
speaker charging port, USB port plug into female USB port and OD3.5mm pin plug into audio port)
3. Play the music by our audio device.
Battery Charging
This Bluetooth speaker has inside a lithium battery, please use the accessory USB cable to charge the
battery though PC or USB travel charger.
Normally it will need 3 hours to fully charge the battery. When charging the light will be red. When the
speaker is fully charged the light will no longer be showing
Package contents
●1 speaker (Bluetooth optional)
●1 USB & audio cable
●1 User Manual
Technical details:
●Power supplier: DC 5V
●
2402.00‐2480.00MHz(ChannelFrequency=2402+1(K‐1),K=1,2,3……79)
●Output power: 2W (1 kHz, THD10%)
●Frequency: 120HZ---15000Hz
●Speaker: OD40mm 4 OHM 3W
●Distance：open air≥10m
●Li-ion: 3.7V 35mm*18mm*5.8mm (350mA)
●SNR：≥65dB
●If it is Bluetooth , the version is Bluetooth 1.0