User's Manual
DVD Mode
Picture ControlPower and Mode Selection
2. Turn the power on the unit and external devices
4. Play the external device.
1. Connect the external devices as shown below (efer Connection Diagram).
3. Select the AV1 or AV2 mode by pressing the MODE button on the unit
or on the remote control.
AUX (AV1/AV2) Mode
öWhen power on or except DVD mode,
sert the disc to turn the power on and
play the disc automatically.
1. Select the DVD mode by pressing
the MODE button on the unit or
on the remote control.
2. Insert a disc you want to play into
the loading disc slot with label side up.
GAMECAMCORDER
AV Input
(AV2)
AV Input (AV1)
AV Output
Select the screen conditions.
Whenever press the APC button, display condition will be changed as below;
APC (Auto Picture Control)
CONTRAST/BRIGHT/COLOR/TINT
Select the one of CONTRAST/BRIGHT/COLOR/TINT and change the picture
condition as your taste.
1. Make display menu on the screen by pressing
the MENU button on the unit or on the remote control.
2. Select the desired menu by pressing the Ā/Ă button
on the unit or control the stick up/down
on the remote control.
3. Control the desired screen conditions by pressing
the +/
-
button on the unit or control
the stick left/right on the remote control.
USER
MILD
NORMAL
DYNAMIC
PICTURE
CONTRAST
BRIGHT
COLOR
TINT
50
40
40
25
SCREEN
WIDE
PICTURE
CONTRAST
BRIGHT
COLOR
TINT
50
40
40
25
SCREEN
WIDE
PICTURE
CONTRAST
BRIGHT
COLOR
TINT
50
40
30
25
SCREEN
WIDE