Model: MA20-1
Speaker To customers Thank you ver y much for your support and trust in our company. In order to use this product more better. Please keep this manual properly in order to learn more about the connection method and using points of the product. Features： 1.Three-way audio system 2.Handmade wooden speakers 3.5.0 Bluetooth function Product specifications： Speaker model: MA20-1 Rated output power L/R: 25W+25W Signal to noise ratio L/R≥75dB(A) Input sensitivity: ≥800mV±50mV Line distortion: <0.
Speaker Thank you for purchasing Moukey MA20-1 multimedia speakers, please read this manual carefully before operating this system. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead inside the triangle, is intended to alert the user to the presence of un-insulated dangerous voltage within the product’s enclosure that may be of a sufficient magnitude to constitute a risk of electric shock for person. To prevent the risk from electric shock,do not remove the cover (or back).
Speaker A A: Front view 1 B: Side view 2 3 4 C: Rear view 5 1: Silk film tweeter x1 2: Midrange 2 inch x1 B 3: Vent 4: Remote control receiver light 6 5: Bass 4 inch x1 7 6: Treble adjustment knob 8 9 7: Bass adjustment knob 8: Volume adjustment knob 9: Audio source status indicator (red AUX input, blue is Bluetooth status) C 10: AUX RCA input interface 10 11 12 13 14 15 1:L 2:R 3:GND 1 2 3 WARNING Electric Shock Hazard, Non Professionals, Do Not Open! 11: AUX 3.
Speaker AUX - vol put + or - + 1.Press the master volume control on the active speaker or press the "AUX" button on the remote control to select LINE IN input. The indicator turns to red. 2.Using audio cable to connect audio source to the speaker. 3.Play your device and adjust the volume properly. - vol put + or Matching: 1.
Speaker 1 2 3 - + 4 5 6 7 8 MA20-1 Function explanation: 1.Mute button: Press once to mute, press again to resume playback. 2.Power button: Press once to shut down. And the machine enters the standby state; Press again to turn on, the machine enters normal working state. 3. Volume reduction: press lightly or press the volume for a while to decrease volume continuously. 4. Volume up: Tap or press the volume for a while to increase volume continuously. 5.
Speaker 1:L 2:R 3:GND 1 2 3 0 WARNING Electric Shock Hazard, Non Professionals, Do Not Open! 1 MADE IN CHINA Precautions: 1: Please pay attention to the correct connection method. The positive and negative polarity cannot be connected wrongly. 2: Please be careful do not to use the product under high temperature or direct sunlight. 3: Please be careful do not to use the product in a humid environment. 4: Please be careful do not to use the product in an environment where water splashes.
Speaker System installation and placement: The sound effect of the system will be slightly affected by the listening environment. If you want to produce a good sound effect, you should consider properly your current location environment before the actual installation.
Speaker Simple trouble shooting: *Sometimes something wrong may be caused by other devices, please check other devices or the using of power supply equipment.
FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
