Technical Specs

Smart Radio

RM-2450-2H

2.4-GHz, Rugged, Long Range 2 Stream Broadband Radio Transceiver

Features

• Very low size, weight, and power (SWaP) for mobile applications

• 57x68x11 mm, 70 grams (2 stream)

• Available in frequency bands up to 6 GHz

• Configurable channel size from 3~40 MHz

• Dynamic Link adaptation to optimize throughput depending on channel conditions

• Adaptive radio modulations from DSSS up to 64QAM

• High Tx power for long range (adjustable up to 1W)

• Up to 50 Mbps Iperf throughput

• Ethernet interface to allow easy integration into various applications

• Point-to-Point, Point-to-Multipoint, and Adhoc operating modes

• Mobile mesh router (Optional)

• High wireless data security with up to 256-bit AES encryption

• OTA firmware upgrade

• Industrial temperature range (-40C to +85C)

• COTS – Commercial off the Shelf

Target Applications

• Unmanned Aerial Vehicles (Drones)

• Mobile robotics

• Mines and Construction site machines

• Public Safety/Video surveillance

• Private Networks in Oil and gas fields

• Wind Turbine and Solar farms

• Wireless ethernet extensions

PAGE 1
Smart Radio RM-2450-2H 2.
PAGE 2
TECHNICAL SPECIFICATIONS Model No. RM-2450-2H (Rugged, Long Range applications Chipset Qualcomm Atheros QCA4531 with Extended Temperature range Software Support OpenWRT (Wireless Router/Linux OS) Center Frequency Range 2412 MHz ~ 2462 MHz Channel Bandwidth* 20/40 MHz Radio Modulation (Auto Adjust) CCK, BPSK, QPSK, 16 QAM, and 64 QAM Data Rates Supported 802.11 b/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48 and 54 Mbps (2.4 GHz) 802.11n: MCS0-15 802.11n version 2.
PAGE 3
802.11n 16 QAM 3/4 30 -80 802.11n 64 QAM 3/4 27 -72 * It is advantageous to use the smallest Channel Bandwidth that can support the Throughput requirements. Smaller bandwidths provide more channels to choose and help avoid interference issues. The system’s SNR is higher at smaller Channel Bandwidths and Range is longer. Antenna Signal Strength -35 to -85 dBm (Recommended), Absolute Maximum=+12 dBm Receiver LNA Gain >10 dB Receive chain Noise Figure 6 dB RF Power control by Driver In 0.
PAGE 4
Power Consumption 9.0W in data transfer mode 3.3W in data receive mode Shield case temperature range (Operating) -40°C to +85°C (Rugged, Long range RM-915-1G model) The System’s thermal design should ensure that the transceiver’s shield case temperature is maintained within these specifications. Cable Assembly Assembly drawing available upon request. Dimensions 68 x 57 x 11.
PAGE 5
Singapore: Doodle Labs (SG) Pte. Ltd.
PAGE 6
Singapore: Doodle Labs (SG) Pte. Ltd.