Integration Instructions

unique antenna connector must be used on the
Part 15 authorized transmitters used in the host
product. The module manufacturers shall
provide a list of acceptable unique connectors.
2.8 Label and compliance information
Grantees are responsible for the continued
compliance of their modules to the FCC rules.
This includes advising host product
manufacturers that they need to provide a
physical or e-label stating “Contains FCC ID”
with their finished product. See Guidelines for
Labeling and User Information for RF Devices –
KDB Publication 784748.
YES
Refer to instruction
If the FCC identification number is not
visible when the module is installed inside
another device, then the outside of the
device into which the module is installed
must also display a label referring to the
enclosed module. This exterior label can
use wording such as the following:
“Contains Transmitter Module FCC ID:
2AG87RM-3625 Or Contains FCC ID:
2AG87RM-3625”
2.9 Information on test modes and additional
testing requirements5
Additional guidance for testing host products is
given in KDB Publication 996369 D04 Module
Integration Guide. Test modes should take into
consideration different operational conditions
for a stand-alone modular transmitter in a host,
as well as for multiple simultaneously
transmitting modules or other transmitters in a
host product.
The grantee should provide information on
how to configure test modes for host product
evaluation for different operational conditions
for a stand-alone modular transmitter in a host,
versus with multiple, simultaneously
transmitting modules or other transmitters in a
host.
Grantees can increase the utility of their
modular transmitters by providing special
means, modes, or instructions that simulates or
characterizes a connection by enabling a
transmitter. This can greatly simplify a host
manufacturer’s determination that a module as
installed in a host complies with FCC
requirements.
YES
Refer to instruction
Any company of the host device which
installs this modular with unlimited
modular approval should perform the test
of radiated & conducted emission and
spurious emission, etc. according to FCC
CFR Title 47 Part 96, only if the tests result
comply with FCC CFR Title 47 Part 96, then
the host can be sold legally
2.10 Additional testing, Part 15 Subpart B
disclaimer
The grantee should include a statement that
the modular transmitter is only FCC
authorized for the specific rule parts (i.e., FCC
transmitter rules) listed on the grant, and that
No
Refer to instruction
The module is installed in the host, and
the host must be evaluated to comply
with Part 15 Subpart B requirements.