Data Sheet

Apr 20, 2020
© 2020 Doodle Labs. All rights reserved. Page
13
Datasheet
Any company of the host device which installs this modular with unlimited modular approval should
perform the test of radiated & conducted emission and spurious emission, etc. according to FCC
part 15C: 15.407 and15.203 & 15.207, 15B Class B requirement, only if the tests result comply
with FCC part 15C: 15.407 and 15.203 & 15.207, 15B Class B requirement, then the host can be
sole legally.
When the module is installed inside another device, the user manual of the hose contain below
1) This device may not cause harmful interference.
2) This device must accept any interference received, including interference that may cause
undesired operation
The device must be professionally installed.
The intended use is generally not for the general public. It is generally for industry/commercial use.
The connector is within the transmitter enclosure and can only b e accessed by disassembly of the
transmitter that is not normally required. The user has no access to the connector.
Installation must be controlled. Installation requires special training.