Installation Instructions

11
5 COMMON FUNCTIONS
5.1 POWER ON
Long press End/ Power key to power on your phone. Background light turns on
and boot animation flashes.
This phone is dual sim and dual standby with GSM network.
1. There’ll be a sign if SIM card is not insert properly or poor contact. Long press
the End/ Power key to power off the phone and reinstall your SIM card.
2. You need to input your mobile phone password or PIN Code if you enable
them when you install your SIM card and power on.
Network searching is automatic and there’ll be signs of the network
names and signal strength which depends on SIM card. You can still
use the emergency call and other functions not based on network
signal when there’s no network service.
5.2 MAKE A CALL
5.2.1 MAKE A DOMESTIC CALL
When network provider logo appears on the screen, you can dial or answer the
phone. The network signal strength is displayed on the top left corner of the
screen. Call quality is affected strongly by obstacles.
Input numbers to make a call under standby interface. Press ‘ Delete’ to correct
wrong number. Press ‘LEFT’ and ‘SAVE to Contacts’ can save this number in
SIM1/ SIM2 or phone.
There’s a animation when dialing and status information when call is picked up.
Please follow this steps for a domestic call：
Area Code－Number－Dial Key
5.2.2 DIAL A TELEPHONE EXT